Electrolux 16850A Washing drum, Door seal, Drain pump, Washing-in chamber, with a brush

Page 25

Care and cleaning 25

5.Clean all parts of the washing machine, especially the nozzles in the top of the

washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and ob- jects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if:

the appliance does not empty and/or spin;

the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump;

a problem with water draining is detected (see chapter “What to do if...” for more de- tails).

WARNING!

Before opening the pump door, switch the appliance off remove the mains plug from the socket.

Proceed as follows:

1.Unplug the appliance.

2.If necessary wait until the water has cooled down.

Image 25
Contents Lavamat 16850A Contents General safety Safety InformationSafety information Use InstallationProduct Description Child SafetyProduct description Detergent dispenser drawer Control PanelSpin Speed indicator, Rinse Hold , Night Cycle symbols Symbols on the control panelSymbols DisplayPage Child safety lock Acoustic signalsFirst USE PersonalizationLoad the laundry Daily USEProgramme option buttons Stain option Prewash optionSensitive option Daily optionSuper Quick option Select the Delay Start buttonExtra Rinse option additional rinse Select the START/PAUSE buttonAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedDrying only USE DryingAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Water left in the tub Draining of water Max. load 7 kgSpun Main wash Rinses Short spin at 1200 rpm Max. load 3 kgAutomatic Programmes Drying ProgrammesTimed Programmes Drying ProgrammesSorting out the laundry Helpful Hints and TipsBefore loading the laundry Removing stainsQuantity of detergent to be used Drying HintsDegrees of water hardness Preparing the drying cycleDrying cycle duration Garment labelsAdditional drying Maintenance wash Care and CleaningExternal cleaning DescalingDoor seal Washing drumDrain pump Washing-in chamber, with a brushPage Cleaning the water inlet filters What to do IF… Frost precautionsEmergency emptying out What to do if…There is no power at the socket Insert the plug into the power socketDelay start has been selected Cancel the delay startSpinning phases has been selected Clean the drain filterTer cleaning action Wait until the symbol 9.4 has gone offRemoved What to do if…Ance Drum Redistribute the laundryTechnical data Technical DataConsumption Values Unpacking InstallationPage Positioning and levelling InstallationAn insulating panel covered with aluminium foil This appliance must be connected to a cold water supply Water inletWater drainage Water-stop deviceEnd of the drain hose can be positioned in three ways Drain hose must not be kinkedEnvironment Concerns Electrical ConnectionEcological hints Packaging materials132 940 240 00