Electrolux 16850A First USE, Personalization, Acoustic signals, Child safety lock, Tion

Page 9

First use

 

9

 

 

FIRST USE

• Ensure that the electrical and water connections comply with the installation instruc- tions.

Remove the polystyrene block and any material from the drum.

Before the first wash, run a cotton cycle at the highest temperature without any laun- dry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the ma- chine.

PERSONALIZATION

Acoustic signals

The machine is provided with an acoustic device, which sounds in the following cases:

at the end of the cycle

in the event of operating problems.

By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the acoustic signal is deactivated (except for the events of operating problems). By pressing these two but- tons again, the acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appliance unattended and not to worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working. There are two different ways to set this option:

Before pressing button 7 : it will be impossible to start the machine.

after pressing button 7 : it will be impossible to change any other programme or op-

tion.

To enable or disable this option press simultaneously for about 6 seconds buttons 4 and 5 until the symbol 9.6 appears or disappears on or from the display.

Image 9
Contents Lavamat 16850A Contents Safety Information General safetySafety information Use InstallationChild Safety Product DescriptionProduct description Detergent dispenser drawer Control PanelSpin Speed indicator, Rinse Hold , Night Cycle symbols Symbols on the control panelSymbols DisplayPage Child safety lock Acoustic signalsFirst USE PersonalizationLoad the laundry Daily USEProgramme option buttons Stain option Prewash optionSensitive option Daily optionSuper Quick option Select the Delay Start buttonExtra Rinse option additional rinse Select the START/PAUSE buttonAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedDrying only USE DryingAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Water left in the tub Draining of water Max. load 7 kgSpun Main wash Rinses Short spin at 1200 rpm Max. load 3 kgAutomatic Programmes Drying ProgrammesTimed Programmes Drying ProgrammesSorting out the laundry Helpful Hints and TipsBefore loading the laundry Removing stainsQuantity of detergent to be used Drying HintsDegrees of water hardness Preparing the drying cycleGarment labels Drying cycle durationAdditional drying Maintenance wash Care and CleaningExternal cleaning DescalingDoor seal Washing drumDrain pump Washing-in chamber, with a brushPage Cleaning the water inlet filters What to do IF… Frost precautionsEmergency emptying out What to do if…There is no power at the socket Insert the plug into the power socketDelay start has been selected Cancel the delay startSpinning phases has been selected Clean the drain filterTer cleaning action Wait until the symbol 9.4 has gone offRemoved What to do if…Ance Drum Redistribute the laundryTechnical Data Technical dataConsumption Values Unpacking InstallationPage Installation Positioning and levellingAn insulating panel covered with aluminium foil This appliance must be connected to a cold water supply Water inletWater drainage Water-stop deviceEnd of the drain hose can be positioned in three ways Drain hose must not be kinkedEnvironment Concerns Electrical ConnectionEcological hints Packaging materials132 940 240 00