Electrolux 16850A user manual USE Drying, Drying only

Page 15

15

reduce the spin speed if needed, by pressing the relevant button

press the button 7

when the programme has finished the display shows a blinking . On the display the DOOR symbol disappears. The door can now be opened.

Turn the programme selector dial to to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

Stand by : once the programme has finished after a few minutes the energy saving sys- tem will be enabled. The brightness of the display is reduced. By pressing any button the appliance will come out of the energy saving status.

USE - DRYING

Drying only

The recommended load size is 3,5 kg for cottons and linen, and 2 kg for synthetic items.

By pressing Drying Time button it is also possible to dry up to 5 kg of cotton items (see the «Drying Programme » table).

The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe.

1.Load the laundry.

2.Select a spin cycle at the maximum spin speed allowed for the type of laundry in order to obtain the best drying performances.

3.Select the drying programme for Cottons or Synthetic in the Drying sector of the programme selector dial. The DRYING and the ANTI-CREASE symbols corresponding to the phases making up the programme appear on the display. At the same time, the symbols corresponding to the level degrees allowed by the set programme/fabric and «AUTO» lights up.

4.Select the automatic drying by pressing the button 3 .

With this button you can select the degree of dryness by an electronic drying. The machine adapts automatically the duration of the drying cycle to the selected de- gree of dryness. If you press this button, a black dash appears under the selected symbol to indicate that a degree has been set. The message «AUTO» disappears. The display shows the duration of the drying cycle. The pilot light of button 7 starts blinking. Press then button 7 to start the programme. A black dash flashes under the DRYING symbol.

Select the timed drying by pressing the button 4

With this button is possible to select the duration of the drying cycle from 10 to 250 minutes according to the type of fabric (cotton or synthetic). Press this but- ton, until the time you want appears on the display. Every time you press this but- ton the drying time increases by 5 minutes. The DRYING TIME DURATION symbol appears for a few seconds on the display near the duration value. Press then but- ton 7 to start the programme. A black dash flashes under the DRYING symbol.

Note!

Image 15
Contents Lavamat 16850A Contents Safety Information General safetySafety information Use InstallationChild Safety Product DescriptionProduct description Detergent dispenser drawer Control PanelDisplay Symbols on the control panelSpin Speed indicator, Rinse Hold , Night Cycle symbols SymbolsPage Personalization Acoustic signalsChild safety lock First USELoad the laundry Daily USEProgramme option buttons Daily option Prewash optionStain option Sensitive optionSelect the START/PAUSE button Select the Delay Start buttonSuper Quick option Extra Rinse option additional rinseOpening the door after the programme has started Cancelling a programmeAltering an option or a running programme Interrupting a programmeDrying only USE DryingAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Main wash Rinses Short spin at 1200 rpm Max. load 3 kg Draining of water Max. load 7 kgWater left in the tub SpunDrying Programmes Drying ProgrammesAutomatic Programmes Timed ProgrammesRemoving stains Helpful Hints and TipsSorting out the laundry Before loading the laundryPreparing the drying cycle Drying HintsQuantity of detergent to be used Degrees of water hardnessGarment labels Drying cycle durationAdditional drying Descaling Care and CleaningMaintenance wash External cleaningWashing-in chamber, with a brush Washing drumDoor seal Drain pumpPage Cleaning the water inlet filters What to do if… Frost precautionsWhat to do IF… Emergency emptying outCancel the delay start Insert the plug into the power socketThere is no power at the socket Delay start has been selectedWait until the symbol 9.4 has gone off Clean the drain filterSpinning phases has been selected Ter cleaning actionDrum Redistribute the laundry What to do if…Removed AnceTechnical Data Technical dataConsumption Values Unpacking InstallationPage Installation Positioning and levellingAn insulating panel covered with aluminium foil This appliance must be connected to a cold water supply Water inletDrain hose must not be kinked Water-stop deviceWater drainage End of the drain hose can be positioned in three waysEnvironment Concerns Electrical ConnectionEcological hints Packaging materials132 940 240 00