Electrolux 16850A user manual Positioning and levelling, Installation

Page 35

Installation 35

5. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal.

6. Fill the smaller upper hole and the two large ones with the corresponding plas- tic plug caps supplied in the bag con- taining the instruction booklet.

7. Connect the water inlet hose as descri- bed under the paragraph «Water inlet».

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the ma-

chine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar

materials under the machine. If it is impossible to avoid positioning the ma- chine next to a gas cooker or coalburning stove,

an insulating panel covered with aluminium foil

on the side facing the cooker or stove, must be inserted between the two appliances.

The machine must not be installed in rooms where the temperature can drop below 0°C. The water inlet hose and the drain hose must not be kinked.

Image 35

Contents Lavamat 16850A Contents Safety information Safety InformationGeneral safety Use InstallationProduct description Child SafetyProduct Description Detergent dispenser drawer Control PanelDisplay Symbols on the control panelSpin Speed indicator, Rinse Hold , Night Cycle symbols SymbolsPage Personalization Acoustic signalsChild safety lock First USELoad the laundry Daily USEProgramme option buttons Daily option Prewash optionStain option Sensitive optionSelect the START/PAUSE button Select the Delay Start buttonSuper Quick option Extra Rinse option additional rinseOpening the door after the programme has started Cancelling a programmeAltering an option or a running programme Interrupting a programmeDrying only USE DryingAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Main wash Rinses Short spin at 1200 rpm Max. load 3 kg Draining of water Max. load 7 kgWater left in the tub SpunDrying Programmes Drying ProgrammesAutomatic Programmes Timed ProgrammesRemoving stains Helpful Hints and TipsSorting out the laundry Before loading the laundryPreparing the drying cycle Drying HintsQuantity of detergent to be used Degrees of water hardnessAdditional drying Garment labelsDrying cycle duration Descaling Care and CleaningMaintenance wash External cleaningWashing-in chamber, with a brush Washing drumDoor seal Drain pumpPage Cleaning the water inlet filters What to do if… Frost precautionsWhat to do IF… Emergency emptying outCancel the delay start Insert the plug into the power socketThere is no power at the socket Delay start has been selectedWait until the symbol 9.4 has gone off Clean the drain filterSpinning phases has been selected Ter cleaning actionDrum Redistribute the laundry What to do if…Removed AnceConsumption Values Technical DataTechnical data Unpacking InstallationPage An insulating panel covered with aluminium foil InstallationPositioning and levelling This appliance must be connected to a cold water supply Water inletDrain hose must not be kinked Water-stop deviceWater drainage End of the drain hose can be positioned in three waysEnvironment Concerns Electrical ConnectionEcological hints Packaging materials132 940 240 00