Electrolux 16850A user manual Automatic washing and drying NON-STOP programme

Page 16

16Use - Drying

The programme time will automatically increase by a few minutes.

5.Press button 7 to start the programme.

After the programme has started, the time remaining is updated every minute.

Note!

The different type of cottons (towelling, sheets, shirts, and so on) or any laundry items rolling up during the spinning phase may result in partial dryness. In the ex- ceptional case that at the end of the cycle the laundry remains slightly wet, we sug- gest that you unfold the rolled up items, redistribute them evenly in the drum and select an additional drying cycle of 20-30 minutes.

6.At the end of the drying programme, the buzzer sounds. A blinking « 0 » appears on the display. At this point, begins an anti-crease phase which lasts for about 10 mi- nutes. During this time the ANTI-CREASE symbol appears on the display. The DOOR symbol remains lit. The door cannot be opened.

If you need to open the door before or during the anti-crease phase or to interrupt it, press any button or turn the programme selector dial to any programme position (except O ), the door can be opened immediately or after a few minutes depending on the mod- el. (In any case do not try to open the door if it is locked!) .

7.Turn the selector dial to the O position to switch the machine off.

8.Remove the laundry.

Automatic washing and drying (NON-STOP programme)

For NON-STOP programmes, the recommended load size is 3,5 kg for cotton and 2 kg for synthetic.

It is possible to dry up to 5 kg of cotton items by pressing the Drying Time button only (see the «Drying Programme » table).

CAUTION!

Do not use a dosing device/ball when carrying out a washing and drying pro- gramme.

1.Load the laundry.

2.Add detergent and fabric softener.

3.Switch the machine on by turning the selector dial to the selected washing pro- gramme/fabric.

4.Select the required options by pressing the relevant buttons.

If possible, do not select a spin speed lower than that proposed by the appliance to avoid too long a drying time therefore saving energy.

In any case the reduction of the spin speed is only possible after selecting drying. The lowest values you can select are the following:

900 r.p.m. for cottons and synthetic with electronic drying;

900 r.p.m. for cottons and 700 r.p.m. for fabrics with timed drying.

5.Select the drying time by pressing button 4 or the dryness degree by pressing button 3 . The display shows the entire duration of the washing and the selected drying cy- cle.

6.Start the programme by pressing button 7 . After the programme has started, the time remaining is updated every minute.

Image 16
Contents Lavamat 16850A Contents General safety Safety InformationSafety information Installation UseProduct Description Child SafetyProduct description Control Panel Detergent dispenser drawerSymbols on the control panel Spin Speed indicator, Rinse Hold , Night Cycle symbolsSymbols DisplayPage Acoustic signals Child safety lockFirst USE PersonalizationDaily USE Load the laundryProgramme option buttons Prewash option Stain optionSensitive option Daily optionSelect the Delay Start button Super Quick optionExtra Rinse option additional rinse Select the START/PAUSE buttonCancelling a programme Altering an option or a running programmeInterrupting a programme Opening the door after the programme has startedUSE Drying Drying onlyAutomatic washing and drying NON-STOP programme Washing Programmes Washing programmes Draining of water Max. load 7 kg Water left in the tubSpun Main wash Rinses Short spin at 1200 rpm Max. load 3 kgDrying Programmes Automatic ProgrammesTimed Programmes Drying ProgrammesHelpful Hints and Tips Sorting out the laundryBefore loading the laundry Removing stainsDrying Hints Quantity of detergent to be usedDegrees of water hardness Preparing the drying cycleDrying cycle duration Garment labelsAdditional drying Care and Cleaning Maintenance washExternal cleaning DescalingWashing drum Door sealDrain pump Washing-in chamber, with a brushPage Cleaning the water inlet filters Frost precautions What to do IF…Emergency emptying out What to do if…Insert the plug into the power socket There is no power at the socketDelay start has been selected Cancel the delay startClean the drain filter Spinning phases has been selectedTer cleaning action Wait until the symbol 9.4 has gone offWhat to do if… RemovedAnce Drum Redistribute the laundryTechnical data Technical DataConsumption Values Installation UnpackingPage Positioning and levelling InstallationAn insulating panel covered with aluminium foil Water inlet This appliance must be connected to a cold water supplyWater-stop device Water drainageEnd of the drain hose can be positioned in three ways Drain hose must not be kinkedElectrical Connection Environment ConcernsPackaging materials Ecological hints132 940 240 00