AMX NXD/NXT-1200VG manual NXA-MTC/RGB Combo Table Top Cable CA2250-70, NXA-MTC/RGB Specifications

Touch Panel Accessories

NXA-MTC/RGB Combo Table Top Cable (CA2250-70)

The VG-Series of Modero Touch Panels (fitted with either an RGB Kit (Video/RGB) or upgraded with an optional NXA-RGBKIT (FG2255-11)) are shipped with a 10' (3.048 m) NXA-MTC/RGB Modero cable (CA2250-70) that supports both RGB, Ethernet, Audio/Video, and Power connections. This cable (FIG. 8) comes terminated with three RJ45 connectors (Ethernet/AV/RGB) and a single 2-pin 3.5 mm mini-Phoenix connector (for power).

FIG. 8 10 Foot NXA-MTC/RGB Combo Table Top Cable

Product Specifications

NXA-MTC/RGB Specifications

Dimensions (HWD):	• Length: 10 feet (3.048 m)
Connectors:	• Ethernet RJ-45 connector (White) routes Ethernet signals between the touch
	panel and the AVB/RGB Breakout Box.
	• Audio/Video RJ-45 connector (Black) routes differential audio/video signals
	between the touch panel and the box.
	• RGB RJ-45 connector (Blue) routes RGB/Component video signals and
	touch control information to the RJ-45 RGB connector on the NXA-RGB card
	(installed within the panel). This connector routes VGA and Component
	video signals between the panel and the AVB/RGB Breakout Box.
	• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external
	breakout box to the target panel.
Included Accessories:	• One NXA-MTC/RGB Combo Table Top Cable (CA2250-70)
	• One black tie wrap (used to join the Ethernet and Power cables)
Other AMX Equipment:	Note: All 1200V, VG-Series, and CV10 Table Top panels routing an
	Audio/Video signal from a breakout box must use the appropriate number of
	CAT5 Suppression Ferrites which are included as part of installation kits
	accompanying your particular Modero panel.
	Each of the following Installation Kits come with the appropriate number of
	CAT5 Suppression Ferrites.
	These ferrites must be installed onto their appropriate locations.
	• Installation Kit for 12" and 17" NXD panels (KA2251-01):
	- 2-pin mini-Phoenix connector (41-5025)
	- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
	- One CAT5 Suppression Ferrites (04-0014)
	- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)
	• Installation Kit for 15" NXD panels (KA2251-02):
	- 2-pin mini-Phoenix connector (41-5025)
	- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
	- Two CAT5 Suppression Ferrites (04-0014)
	- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)

28 VG-Series Modero Touch Panels