AMX NXD/NXT-1200VG, NXD/NXT-1500VG, NXD/NXT-1700VG - page 13

Introduction

3

VG-Series Modero Touch Panels

1200VG Panel Specifications (Cont.)

Panel LCD Parameters: • Aspect Ratio: 4 x 3

• Brightness (luminance): 250 cd/m2

• Channel transparency: 8-bit Alpha channel transparency

• Contrast ratio: 300:1

• Display area (HW): 183.10 mm x 247.40 mm

• Display colors: 256K (18-bit color depth)

• Dot/Pixel pitch: 0.297 mm

• Screen resolution (HV): 800 x 600 pixels

• Video formats: NTSC, PAL, and SECAM (shown within variable-size

video windows)

Active Screen Area: • 9.69” x 7.26” (24.60cm x 18.45cm)

Viewing Angles: • Vertical: + 80° (up from center) and - 80° (down from center)

Features: • Display of Component RGB/HDTV signals (done through the use of both

an internal NXA-RGB card and an external NXA-AVB/RGB Breakout

Box)

• Enhanced hardware security (via an externally mounted Kensington

Lock system)

• Ethernet connectivity (replaced ICSNet as a method of communication)

• New and improved connector compartment

• Pass-thru Computer Control (via the NXA-RGB card)

• RGB or Component input

• Streaming MPEG-2 and MPEG-4 digital video support

• Streaming MP2, MP3, and AAC digital audio support

• Support of the latest G4 applications: G4 Computer Control, G4Web

Control®, Dynamo, TakeNote™, and PictureFrame™.

• USB mouse/keyboard/programming ports

Supported Audio Sample Rates: • 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,

11025Hz, and 8000Hz.

Certifications: • FCC Part 15 Class B, CE, and EN 60950

Supported Transport Protocols: • RTP (MPEG-2/MPEG-4 Transport Stream)

• UDP (MPEG-2 Transport Stream)

Supported Audio Codecs: • Advanced Audio Coding (AAC)

• MPEG Audio Level 2 (MP2)

• MPEG Audio Level 3 (MP3)

Supported Video Codecs: •MPEG-2

•MPEG-4

Button Assignments: Button assignments can only be adjusted in TPD4 and not on the panels.

• Button channel range: 1 - 4000 button push and Feedback (per address

port)

• Button variable text range: 1 - 4000 (per address port)

• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)

• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)

• Address port range: 1 - 100

Contents

Main AMX Limited Warranty and Disclaimer Page Page Table of Contents Installation Procedures: 12" and 15" Panels .....................................................53 Page Page Page Page Introduction Multimedia Streaming Video Touch Panels (VG-Series) Product Specifications (NXD-1200VG and NXT-1200VG) Page Page Page Page Product Specifications (NXD-1500VG and NXT-1500VG) The following table outlines the specifications for VG-Series of 15" Modero panels. 1500VG Panel Specifications Page Page Page Page Product Specifications (NXD-1700VG and NXT-1700VG) The following table outlines the specifications for VG-Series of 17" Modero panels. 1700VG Panel Specifications Page Page Page Page VG-Series Modero Connectors FIG.1 shows the connectors on the VG-Series Modero panels. external keystrokes sent from the external USB keyboard. Connecting and Using USB Input Devices 1. 2. 3. Page Touch Panel Accessories NXA-AVB/RGB Breakout Box (FG2254-11) NXA-AVB/RGB Specifications RGB RJ-45 connection and wiring information Using the HD-15 high-density connector Touch Panels VG-Series and Video-capable Installing the NXA-AVB/RGB HD-15 Connector Pinouts Wiring the NXA-AVB/RGB connectors and cables supply 12 VDC power The rear-panel wiring connections are described below (from left to right): F Wiring the NXA-AVB/RGB for Unbalanced Audio Wiring the NXA-AVB/RGB for Balanced Audio Page Wiring for Pass-Thru Computer Control 1. 2. 3. 11. 4. 5. NXA-MTC/RGB Combo Table Top Cable (CA2250-70) NXA-MTC/RGB Specifications Wiring and Connection Information FIG.9 shows a top view of the finished cable. NXA-MTC/RGB Specifications (Cont.) Associated Touch Panels (where used) Red Red Installing CAT5 Suppression Ferrites 1. 4. 2. 3. NXA-RGB RGB/VGA Interface Card (FG2260) NXA-RGB Specifications Supported Component/VGA Video Resolutions and Formats RGB RJ-45 connection and wiring information NXA-CFTP Compact Flash (FG2116-22) NXA-PCI80211G Wireless Card (FG2255-04) Product Specifications FCC Statement: Certifications : FCCID: CWU-WN2301A, CE, EN 60950, EN 300 328, and RSS 210 NXA-PCI80211G Specifications (Cont.) Installation and Upgrade of the Internal NXT Components Step 1: Remove the existing NXT Outer Housing 1. 5. 2. 3. Page Page Step 4: Install the Compact Flash Memory Card upgrade 1. 2. 3. Page Installation and Upgrade of the Internal NXD Components Page 3. 4. Product Specifications 5. NXT-BP Power Pack (FG2255-10) NXA-BASE/B Battery Base Kit (FG2255K) Page Page Page NXT-CHG Battery Charger Kit (FG2255-50K) Page Page Page Installation Procedures: 12" and 15" Panels Unpacking the Panel 1. 2. 3. Installing Internal Components Page Page Page 11. Pre-wall Installation of the Conduit Boxes 1. 4. 2. 3. Installation of the NXD Touch Panel Installing the NXD panel within a Conduit Box 1. 2. Page 3. 4. 7. 5. 6. * * 11. 12. 13. Installing the NXD into a Flat Surface using #4 screws 1. 2. 3. 4. Page 11. 12. Installing an NXD into an (optional) Rack Mount Kit (NXA-RK12 or NXA-RK15) 1. 5. 2. 3. 6. 7. 8. Wiring Guidelines for the 1200VG and 1500VG Panels 3. Audio/Video Port: Connections and Wiring Ethernet/RJ-45 Port: Connections and Wiring Audio/Video RJ-45 Pinout Information FIG.50 diagram s the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable. Ethernet RJ-45 Pinouts and Signals 123 45678 Installation Procedures: 17" Panels Unpacking the Panel 1. 2. 3. Installing the Internal Components Page Cable Installation for the MP-TP17 Back Box 1. 2. 3. 4. Finalizing the installation 1. 2. Page Pre-wall Installation of the CB-TP17 Conduit Box 1. 2. Page Installation of an NXD-1700VG Installing the NXD-1700VG within a CB-TP17 Conduit Box 1. 2. 3. 4. 5. 6. 10. 7. 8. * 1. * 2. 3. 4. 5. ** 7. 8. 9. 10. Page Installing the NXD-1700VG into a Flat Surface using #6 screws 1. 5. 2. 3. 6. gripping the faceplate and pulling with gentle outward force. 7. 8. 9. 10. 11. Page Wiring Guidelines for the 1700VG Panels 3. Audio/Video Port: Connections and Wiring Ethernet/RJ-45 Port: Connections and Wiring Audio/Video RJ-45 Pinout Information FIG.66 diagram s the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable. Ethernet RJ-45 Pinouts and Signals 123 456 78 Page Panel Calibration Calibrating the Modero Panel 1. Page Configuring Communication Modero Setup and System Connection 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Configuring and Using USB with a Virtual Master Step 1: Setting up the USB Driver on the PC 1. 2. 3. 4. 5. 9. Step 2: Confirming the Installation of the USB Driver on the PC 1. 6. 2. 3. 7. 8. 10. 9. Step 3: Confirm and View the current AMX USB device connections 1. 2. 4. Step 4: Using a USB to Configure a Virtual Master (using NetLinx Studio) 1. 5. 6. 7. 8. 9. 10. Page Wireless Settings Page - Wireless Access Overview IP Routing Hot Swapping Configuring a Wireless Connection Step 1: Configuring the Panels Wireless IP Settings Page Step 2: Configuring the Cards Wireless Security Settings Page 7. 8. 9. 10. 11. 12. Page Configuring a Wired Ethernet Connection Step 1: Configuring the Panels Wired IP Settings IP Settings section - Configuring a DHCP Address over Ethernet 1. 2. 3. 4. 5. 6. Step 2: Choosing a Master Connection Mode Setting Step 3: Configuring the Ethernet Connection Type Page Page Page Page Using G4 Web Control to Interact with a G4 Panel Page Using your NetLinx Master to control the G4 panels 1. 2. 3. 4. 5. 6. 7. 8. 9. Page Upgrading Modero Firmware Upgrading the Modero Firmware via the USB port 4. Step 1: Configure the panel for a USB Connection Type 1. 2. Page 7. 8. 9. 10. Step 3: Confirm and Upgrade the firmware via the USB port 1. Page Upgrading the Modero Firmware via an IP Address Page Page 11. 12. Upgrading Accessory Devices via an IP Address Step 1: Prepare the NXA-BASE/B for firmware transfer 1. 2. 3. Page 9. 10. 11. 12. 13. Upgrading the NXA-RGB and NXA-AVB/RGB Firmware Firmware Pages and Descriptions This section describes each firmware page and their specific functional elements. Setup Navigation Buttons The Setup Navigation Buttons (FIG.103) appear on-screen when the Setup page is active. Setup Navigation Button Elements Setup Page The elements of the Setup page are described in the table below: Setup Navigation Button Elements (Cont.) Setup Page Elements Connection Status Setup Page Elements (Cont.) Project Information Page The elements of the Project Information page are described in the table below: Project Information Page Elements Panel Information Page The elements of the Panel Information page are described in the table below: Panel Information Page Elements Time & Date Setup Page The elements of the Time & Date Setup page are described in the table below: Panel Information Page Elements (Cont.) Volume Page The elements of the Volume page are described in the table below: Time & Date Setup Page Elements (Cont.) Volume Page Elements Supported sampling rates for WAV Protected Setup Page Volume Page Elements (Cont.) Supported WAV Sampling Rates Video Adjustment Slide-Out Option Bar Slot 1 Slot 2 Slot 3 Video Adjustment - RGB Adjustment Page The elements of the RGB Setup page are described in the table below: Video Adjustment Page Elements (Cont.) RGB Adjustment Page Elements Page Page Adjusting the Incoming Signal on the RGB Adjustment Page 1. 2. 3. 4. 5. 8. 9. 13. 10. 11. Video Adjustment - Streaming Adjustment Page Streaming Video Adjustment Page Elements (Cont.) (Short for Streaming Video Adjustment Page Elements (Cont.) (Short for Battery Base Page Battery Base Page Elements Battery Base Page Elements (Cont.) Protected Setup Navigation Buttons Protected Setup Navigation Button Elements Protected Setup Page The elements of the Protected Setup page are described in the table below: Protected Setup Page Elements Protected Setup Page Elements (Cont.) G4 Web Control Page G4 Web Control Page Elements G4 Web Control Page Elements (Cont.) Sensor Setup Page The elements of the Sensor Setup page are described in the table below: Using the Automated Brightness Control feature (DIM Mod e) Please follow the steps below to set up Automated Brightness Control: 1. 2. Sensor Setup Page Elements (Cont.) Page The elements of the Password Setup page are described in the table below: Calibration Page access the Calibration page. Password Setup Page Elements Wireless Settings Page Page Page Page System Settings Page The elements of the System Settings page are described in the table below: System Settings Page Elements System Settings Page Elements (Cont.) Page Displaying Stream Content (version 0.8 or higher). information are transported together to the same port on the destination device. Requirements for Receiving Streamed Content of 5002 into the Target Audio Port field. Setting up a Modero Panel to Receive and Display a Stream Step 1: Obtaining the IP Address of the target panel 1. 2. 3. 4. Page 9. 10. 11. 12. 13. Page Page Page Page Page Programming These Page Commands are used in NetLinx Programming Language and are case insensitive. Button Assignments Page Commands Page Page Page Page Page Programming Numbers RGB triplets and names for basic 88 colors RGB Values for all 88 Basic Colors RGB Values for all 88 Basic Colors (Cont.) Font styles and ID numbers RGB Values for all 88 Basic Colors (Cont.) Default Font Styles and ID Numbers Border styles TPD4 Border Styles by Name TPD4 Border Styles by Name (Cont.) "^" Button Commands Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Text Effect Names Text Effects Button Query Commands All custom events have the following 6 fields: Custom Event Fields Button Query Commands Page Page Page Page Page Page Page Panel Runtime Operations Panel Runtime Operation Commands Page Page Page Input Commands These Send Commands are case insensitive. Input Commands Input Commands (Cont.) Embedded Codes The following is a list of G4 compatible embedded codes: Embedded Codes Panel Setup Commands These commands are case insensitive. Panel Setup Commands Dynamic Image Commands The following is a listing and descriptions of Dynamic Image Commands. Dynamic Image Commands Dynamic Image Commands (Cont.) Troubleshooting Troubleshooting Information Page Page Page Appendix Text Formatting Codes for Bargraphs/Joysticks Bargraph Text Code Inputs Formatting Code Operations Example Text Area Input Masking Input mask character types Input mask ranges [0|255] This allows a user to enter a value from 0 to 255. Input mask next field characters Input mask literals Input mask output examples URL Resources Special escape sequences