AMX NXD/NXT-1700VG, NXD/NXT-1500VG, NXD/NXT-1200VG manual Cont

	Introduction
1700VG Panel Specifications (Cont.)
Rear Panel Components	(Side panel location on NXD-Wall Mount panels)
(Cont.):
USB connector (2):	• The two Type-A USB ports can connect up to two external keyboard or
	mouse devices for use with Virtual PC applications.
	• These ports can be used to communicate to a PC and transfer pass-thru
	touch control from the external devices, thru the NXA-AVB/RGB, to the
	PC, and then back again. Refer to the Preparing your panel for Pass-
	Thru Control (using the NXA-AVB/RGB Breakout Box) section on
	page 26.
Mini-USB connector:	• 5-pin Mini-USB connector used for programming, firmware update, and
	touch panel file transfer between the PC and the target panel.
	Note: When connecting the panel to PC using a CC-USB (or compatible)
	cable, be sure to power the panel On before attempting to connect the
	USB cable from the PC to the mini-USB port on the panel. Refer to the
	Step 5: Confirm and View the current AMX USB device
	connections section on page 100 for more information.
Operating / Storage	• Operating Temperature: 10° C (50° F) to 40° C (104° F)
Environment:	• Operating Humidity: 20% to 85% RH
	• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
	• Storage Humidity: 5% to 85% RH
Included Accessories:	• Installation Kit for 12" and 17" NXD panels (KA2251-01):
	- 2-pin mini-Phoenix connector (41-5025)
	- Four Drywall clips (62-5924-05) and #6 - sheet metal screws
	- One CAT5 Suppression Ferrites (04-0014)
	- Three Phillips-head screws (#4-20 x 0.250 Black)
	• Installation Kit for 15" and 17" NXT panels (KA2251-04):
	- 2-pin mini-Phoenix connector (41-5025)
	- One CAT5 Suppression Ferrites (04-0014)
	- Three Phillips-head screws (#4-20 x 0.250 Black)
	• Included within the RGB Kit (FGxxxx-xxRGB) is the following:
	- Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)
	- NXA-AVB/RGB Breakout Box (FG2254-11)
	- NXA-RGB internal RGB/VGA Interface Card (FG2260)
	- NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)
	- NXA-MTC/RGB Modero 10’ foot Table Top Cable
	(with RGB connector) (CA2250-70)
	• Included within the Video Kit (FGxxxx-xV) is the following:
	- Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)
	- Modero 10’ foot Table Top Cable (CA2250-50)
	- NXA-AVB/ETHERNET Breakout Box (FG2254-10)

VG-Series Modero Touch Panels 15