AMX NXD/NXT-1200VG, NXD/NXT-1500VG, NXD/NXT-1700VG manual NXA-RGB RGB/VGA Interface Card FG2260

Touch Panel Accessories

5.Repeat this process again only when installing an additional CAT5 Suppression Ferrite (model specific).

3

To Touch

Panel 2

1

4

Ferrite Ferrite

6 inches

Connector 1	- used for Audio/Video (Black)	Connector 3	- used for Power
Connector 2	- used for Ethernet (White)	Connector 4	- used for RGB (Blue)

FIG. 11 Ferrite connector location on Audio/Video RJ-45 cable

It is recommended that any upgrade of internal components be done simultaneously in order to reduce the risk of damage to internal components.

If a user will be upgrading an NXD panel with a wireless card and an NXA-RGB card (NXA-RGBKIT), it is recommended that these both be done at the same time if possible.

NXA-RGB RGB/VGA Interface Card (FG2260)

The NXA-RGB (FIG. 12) is an RGB/VGA plug-in interface card that allows any of AMX’s VG-Series Modero Touch Panels to accept either RGB or HDTV Component signals directly from an external source when routed through an optional NXA-AVB/RGB Breakout Box. This card is field upgradeable and works in-tandem with the RGB connector on the front of an NXA-AVB/RGB Breakout Box.

FIG. 12 NXA-RGB RGB/VGA Interface Card (installed within a VG-Series panel)

The NXA-RGB card is an optional accessory (already installed within Video/RGB panels) that can be added to any VG-Series Video Modero panel as part of an upgrade kit. The NXA-RGB card is a daughter card that plugs into the Modero’s main board. This card provides the ability to display computer graphics (RGB) or component (YCrCb) video within a full screen or resizable on-screen window on the Modero panel. The NXA-RGB card must be used with the NXA-AVB/RGB Breakout Box. This breakout box allows the Modero to accept and display high-bandwidth and high-quality RGB as well as HDTV Component video signals. This box then converts the RGB or component video so that it can be sent across a UTP (unshielded twisted pair) cable to the from the rear RGB/Component DB-15 connector (rear of the box), through the front RGB RJ-45 connector, and then to the panel via the RJ-45 connector on the installed NXA-RGB card.

VG-Series Modero Touch Panels 31