AMX NXD/NXT-1700VG, NXD/NXT-1500VG, NXD/NXT-1200VG manual Fon, Gdi, Giv

Programming

"^" Button Commands (Cont.)

^FON	Font ID numbers are generated by the TPDesign4 programmers report.
Set a font to a	Syntax:
specific Font ID	"'^FON-<vt addr range>,<button states range>,<font value>'"
value for those
	Variable:
buttons with a
defined address	variable text address range = 1 - 4000.
range.	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	font value = range = 1 - XXX. Refer to theDefault Font Styles and ID Numbers table on
	page 187.
	Example:
	SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"
	Sets the font size to font ID #4 for the On and Off states of buttons with the variable text
	range of 500-504 & 510-515.

The Font ID is generated by TPD4 and is located in TPD4 through the Main menu.

Panel > Generate Programmer's Report >Text Only Format >Readme.txt.

"^" Button Commands (Cont.)

^GDI	Syntax:
Change the	"'^GDI-<vt addr range>,<bargraph drag increment>'"
bargraph drag	Variable:
increment.
	variable text address range = 1 - 4000.
	bargraph drag increment = The default drag increment is 256.
	Example:
	SEND_COMMAND Panel,"'^GDI-7,128'"
	Sets the bargraph with variable text 7 to a drag increment of 128.
^GIV	Parameters 1,2, and 3 will cause a bargraph or slider to be inverted regardless of
Invert the	orientation. Their effect will be as described for joysticks.
joystick axis and	Syntax:
move the origin to	"'^GIV-<vt addr range>,<joystick axis to invert>'"
another corner.
	Variable:
	variable text address range = 1 - 4000.
	joystick axis to invert = 0 - 3.
				0 = Normal
		0	1
				1 = Invert horizontal axis
				2 = Invert vertical axis
		2	3
				3 = Invert both axis locations
	For a bargraph 1 = Invert , 0 = Non Invert
	Example:
	SEND_COMMAND Panel,"'^GIV-500,3'"
	Inverts the joystick axis origin to the bottom right corner.

204 VG-Series Modero Touch Panels