AMX NXD/NXT-1700VG, NXD/NXT-1500VG, NXD/NXT-1200VG manual G4 Web Control Page Elements

Firmware Pages and Descriptions

Channel Port

Level Port

Channel Code

Number

		Channel Code		Channel Port
		Number
3,132			Address
			Port
	Button
2,8	3,50			Level Port
			Address Code	Channel Code
			Number	Number

7,10

Slider

4,9 1,8

Channel Code Number

Address

Port

Address Code Number

FIG. 119 Button/slider Function Show example

G4 Web Control Page

The G4 Web Control page (FIG. 120) centers around enabling and disabling both the display and control of your panel (via the web). An external PC running a VNC client (installed during the initial communication to the G4 panel) makes this possible.

FIG. 120 G4 Web Control page

Each panel supports the open standard Virtual Network Computing (VNC) interface. These panels contain a VNC server that allows them to accept a connection from any other device running a VNC client. Once a connection is established to that target device, the client can control the touch panel remotely. The elements of the G4 Web Control page are described in the table below:

G4 Web Control Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).

156 VG-Series Modero Touch Panels