AMX NXD/NXT-1700VG, NXD/NXT-1500VG manual Clip Facing UP, MB-TP15 Mounting contact surface area

.72[18MM]

3.83[97MM]

4.52[115MM]

Installation Procedures: 12" and 15" Panels

3.23[82MM]

FIG. 36 MB-TP15 Mounting contact surface area

When installing a VESA mount to the rear plastic cover, use only the AMX provided #8-32 screws.

11.Secure these four #8-32 screws to the rear plastic cover by using a grounded Phillips-head screwdriver. This step secures the VESA mount to the rear of the panel.

Rear plastic cover (rear view)

Rim of the strain relief grommet should lie flush against enclosure

CLIP FACING UP

VESA mount connection location

(USE ONLY AMX PROVIDED #8-32 screws)

FIG. 37 Installation of grommet into the rear plastic enclosure

Refer to your particular VESA mount manufacturer’s installation procedures for further surface mounting procedures.

VG-Series Modero Touch Panels 57