Installation Procedures: 12" and 15" Panels

Removing the Original Modero Back Box

1.Detach all connectors from the side of the touch panel.

2.Remove the magnetic faceplate from the NXD unit by gripping the faceplate and pulling outwards while applying a small amount of pressure to remove it from the main unit.

3.Place the LCD face-down on a soft cloth to expose the back of the panel and prevent scratching of the LCD.

4.Unscrew the Stereo Output nut from the Stereo Output jack.

5.Remove the I/O connector plate by using a grounded Phillips-head screwdriver to remove the two screws and slide the I/O connector plate away from the back box housing.

6.Remove the four pan-head Housing Screws from the rear of the NXD unit (FIG. 33). These screws secure the back box to the internal panel casing.

DO NOT

 

 

 

 

 

REMOVE

 

 

 

 

DO NOT REMOVE

these

 

 

 

 

 

 

 

 

 

 

these panel

panel

 

 

 

 

 

 

 

 

securing screws

securing

 

 

 

 

 

 

 

 

 

screws

 

 

 

 

 

 

 

 

 

 

 

 

Unscrew these four Housing Screws to remove the back box.

These make direct contact with the black outer housing.

FIG. 33 Location of the attachment screws on the NXD back box

DO NOT REMOVE THE FOUR PANEL SECURING SCREWS. These screws secure

the LCD to the metallic casing underneath.

7.Lift the back box housing to separate it from the internal panel casing.

Installing the MP-TP12/15 Back Box

1.Unscrew the four pan-head Housing screws (#8-32) from the MP-TP12/15 rear plastic cover.

2.Gently place the MP-TP12/15 back box over the internal panel casing (with the cable routing hole on the right-side of the panel).

3.Re-install and secure the four pan-head Housing Screws into their pre-drilled holes along the edges of the MB-TP12/15 back box (FIG. 34) and secure them using a grounded Phillips-head screwdriver.

4.Place the I/O connector plate back over the connector opening and align the connector locations.

5.Resecure the I/O connector plate (using a grounded Phillips-head screwdriver) and resecure the Stereo Output nut on the Stereo Output jack.

54

VG-Series Modero Touch Panels

Page 64
Image 64
AMX NXD/NXT-1700VG, NXD/NXT-1500VG manual Removing the Original Modero Back Box, Installing the MP-TP12/15 Back Box