AMX NXD/NXT-1700VG, NXD/NXT-1500VG, NXD/NXT-1200VG manual @Dpg, @Pdr, @Phe, @Php, @Pht

Programming

Page Commands (Cont.)

@DPG	Syntax:
Delete a specific	"'@DPG-<popup page name>;<popup group name>'"
popup page from	Variable:
specified popup
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
group if it exists.
	popup group name = 1 - 50 ASCII characters. Name of the popup group.
	Example:
	SEND_COMMAND Panel,"'@DPG-Popup1;Group1'"
	Deletes the popup page ’Popup1’ from the popup group ’Group1’.
@PDR	If the flag is set, the popup will return to its default location on show instead of its last drag
Set the popup	location.
location reset flag.	Syntax:
	"'@PDR-<popup page name>;<reset flag>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	reset flag = 1 = Enable reset flag
	0 = Disable reset flag
	Example:
	SEND_COMMAND Panel,"'@PDR-Popup1;1'"
	Popup1 will return to its default location when turned On.
@PHE	Syntax:
Set the hide effect	"'@PHE-<popup page name>;<hide effect name>'"
for the specified	Variable:
popup page to the
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
named hide effect.
	On.
	hide effect name = Refers to the popup effect names being used.
	Example:
	SEND_COMMAND Panel,"'@PHE-Popup1;Slide to Left'"
	Sets the Popup1 hide effect name to ’Slide to Left’.
@PHP	Only 1 coordinate is ever needed for an effect, however, the command will specify both.
Set the hide effect	This command sets the location at which the effect will end at.
position.	Syntax:
	"'@PHP-<popup page name>;<x coordinate>,<y coordinate>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	Example:
	SEND_COMMAND Panel,"'@PHP-Popup1;75,0'"
	Sets the Popup1 hide effect x-coordinate value to 75 and the y-coordinate value to 0.
@PHT	Syntax:
Set the hide effect	"'@PHT-<popup page name>;<hide effect time>'"
time for the	Variable:
specified popup
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
page.
	On.
	hide effect time = Given in 1/10ths of a second.
	Example:
	SEND_COMMAND Panel,"'@PHT-Popup1;50'"
	Sets the Popup1 hide effect time to 5 seconds.

180 VG-Series Modero Touch Panels