AMX NXD/NXT-1200VG, NXD/NXT-1500VG, NXD/NXT-1700VG manual System Settings Page Elements

Firmware Pages and Descriptions

System Settings Page

The System Settings page (FIG. 126) sets the Secondary DNS Address information with its corresponding IP communication parameters, NetLinx Master communication settings, and reads the device number assigned to the Modero panel.

IP Settings section

Master Connection section (NetLinx Master properties)

Master Connection features are not saved until the panel is rebooted

Red fields are user-editable

Blue fields cycle through choices

Grey fields are read-only

FIG. 126 System Settings page showing default values (reads and assigns values to the panel and Master)

The elements of the System Settings page are described in the table below:

System Settings Page Elements

Back:	Saves the changes and returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).
IP Settings:	Sets the IP communication values for the panel and contains:
DHCP/Static
	Sets the panel to either DHCP or Static communication modes.
	• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses from
	client stations logging onto a TCP/IP network via a DHCP server.
	• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP
	network.
IP Address
	Sets the secondary IP Address assigned to the panel.
Subnet Mask
	Sets a subnetwork address to the panel.
	• Subnetwork mask is the technique used by the IP protocol to filter messages
	into a particular network segment (Subnet).
Gateway
	Sets a gateway value to the panel.
	• Gateway is a computer that either performs protocol conversion between
	different types of networks/applications or acts as a go-between two or more
	networks that use the same protocols.
Host Name
	Sets the host name of the panel.
Primary DNS
	Sets the address of the primary DNS server used for host name lookups.
	• DNS (Domain Name System) is software that lets users locate computers on
	a local network or the Internet (TCP/IP network) by host and domain. The
	DNS server maintains a database of host names for its’ domain and their
	corresponding IP Addresses.
Secondary DNS
	Sets a secondary DNS value to the panel.
Domain
	Sets the unique name on the Internet to the panel for DNS look-up.
	• The panel belongs to the DNS domain.

166 VG-Series Modero Touch Panels