AMX NXD/NXT-1200VG, NXD/NXT-1500VG, NXD/NXT-1700VG Install the Compact Flash Memory Card upgrade

Touch Panel Accessories

Outer Housing

NXA-RGB card

NXA-RGB card screw locations (4)

RGB I/O connector plate

FIG. 19 Location of the NXA-RGB card and I/O plate

Step 4: Install the Compact Flash Memory Card upgrade

1.Discharge any static electricity from your body by touching a grounded metal object and then locate the existing Compact Flash card (factory-shipped with 128 MB) on the main board (FIG. 20 for Table Top panels and FIG. 23 for Wall Mount panels).

Outer Housing

NXA-PCI80211G wireless card location

I/O connector plate

Eight Housing
Screws	Compact Flash card

FIG. 20 Location of the Compact Flash card and I/O plate on NXT

2.Insert the tip of a grounded flathead screwdriver into one of the card removal grooves (located on either side of the card), and gently pry the card out of the slot (FIG. 21). Repeat this process on the opposite card removal groove. This alternating action causes the card to "wiggle" away from the on-board connector pins.

3.Grip the old card by its sides and then carefully pull it out of the slot.

40 VG-Series Modero Touch Panels