AMX NXD/NXT-1700VG, NXD/NXT-1500VG, NXD/NXT-1200VG manual Other AMX Equipment, FG031-50, FG2255-11

Introduction

1200VG Panel Specifications (Cont.)

Other AMX Equipment:

Several items are included within both the Video and RGB Kits. Any items not specifically included within those kits can be considered as optional accessories.

•CB-TP12 (FG031-10): - 12" metallic conduit box for Wall Mount installations.

•CC-USB (Type-A) to Mini-B 5-Wire programming cable (FG10-5965)

•Kensington Lock Bracket (FG2259-10) (optional only with NXTs)

•MAX-CSE MAX Video Encoder (FG2178-70)

•MB-TP12 Universal VESA Mounting Box for 12" WallMount panels

(FG031-50):

-Black metallic VESA back box (62-0031-50)

-Black plastic cover (with grommet opening) (60-0031-50)

-Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)

-Tie Wrap (Large) (45-0009A) (for use with NXA-MTC/RGB)

-Twelve Under-cut Phillips-head screws (#6-32 x 0.500 Black) (80- 0139)

-Strain relief grommet (45-0004-03) (for use with CA2250-50)

-Universal VESA Mount grommet (45-0032-01)

(for use with NXA-MTC/RGB)

•NXA-AVB/ETHERNET Breakout Box (FG2254-10)

-Also comes included within Video Kits.

•NXA-AVB/RGB Breakout Box (FG2254-11)

-Also comes included within RGB Kits.

•NXA-BASE/B (FG2255)

-Wireless base for Table Top touch panels (NXT models only).

•NXA-KLB Kensington Lock Kit for NXT panels (FG2259-10)

(optional only with NXT models)

•NXA-MTC/RGB Modero 10’ foot Table Top Cable (with RGB connector) (CA2250-70).This cable is not wall-rated for NXD models.

•NXA-PCI80211G Wireless Card (FG2255-04)

•NXA-RGBKITRGB upgrade kit for Composite Video touch panels

(FG2255-11):

-NXA-AVB/RGB Breakout Box (FG2254-11)

-NXA-MTC/RGB Modero 10’ foot Table Top Cable (with RGB connector) (CA2250-70)

-NXA-RGB internal RGB/VGA Interface Card (FG2260)

-NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)

-NXT Table Top replacement I/O plate (with RGB connector opening) (62-2250-59)

-NXD WallMount replacement adhesive overlay for existing I/O plate (53-2250-03)

•Note: The NXT replacement I/O plate is a single piece which is meant to be swapped-out with the pre-existing plate shipped with Composite Video panels. On NXD panels, the RGB connector opening is pre-drilled into the I/O plate but can only be accessed by replacing the adhesive cover and maintaining the existing overlay. When upgrading NXD panels with this kit, don’t replace the NXD I/O plate, only the adhesive cover.

•NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)

•NXA-RK12 (FG2904-50)

-RackMount kit for 12" Wall Mount touch panels (NXD models only)

•NXT-BP (FG2250-10)

-Battery pack for Table Top panels. Provides 4 hours of continual operation (NXT models only)

6 VG-Series Modero Touch Panels