Installation Procedures: 12" and 15" Panels

Don’t disconnect the connectors from the touch panel. The unit must be installed with the necessary connectors before being inserted into the equipment rack.

6.Insert the main 12-inch Modero unit into an NXA-RK12 (FIG. 46) or the 15-inch Modero into an NXA-RK15 (FIG. 47).

Rack mount

 

Faceplate

 

frame (NXA-RK12)

 

 

FIG. 46 NXD 12 inch Wall Mount panel installed into an NXA-RK12 Rack Mount Kit

Rack mount frame (NXA-RK15)

Faceplate

FIG. 47 NXD 15 inch Wall Mount panel installed into an NXA-RK15 Rack Mount Kit

7.Secure the panel to the NXA-RK frame by first inserting and then tightening the four #4-40 screws (provided). Line up the four mounting holes and use a grounded Phillips-head screwdriver to tighten the screws in a clockwise direction.

8.Insert the NXA-RK (with connected NXD unit) into the equipment rack, making sure to align the screw holes along the sides on the NXA-RK with the holes in the equipment rack.

VG-Series Modero Touch Panels

67

 

 

Page 77
Image 77
AMX NXD/NXT-1200VG, NXD/NXT-1500VG, NXD/NXT-1700VG manual Rack mount