AMX NXD/NXT-1200VG, NXD/NXT-1500VG, NXD/NXT-1700VG manual Modero connection information

Configuring Communication

6.Press Done to close the keypad, assign the number, and return to the Protected Setup page.

FIG. 72 Protected Setup page

7.Press the on-screen Reboot button to restart the panel and incorporate any changes.

Before continuing, open NetLinx Studio. This program assists in developing a System Number, Master IP/URL, and Master Port number. Refer to your NetLinx Master’s instruction manuals for more information.

8.Obtain the System Number and Master IP Address from NetLinx Studio. This information must be specific for the system used with the configured Modero panel.

9.Press the grey Front Setup Access button for 3 seconds to open the Setup page.

10.Press the Protected Setup button (located on the lower-left of the panel page) to open the Protected Setup page.

11.Press the System Settings button (located on the Protected Setup page) to open the System Settings page (FIG. 73) and begin configuring the communication settings on the panel to match those of the target Master.

Modero connection information

MAC Address from panel is factory set to a unique address

NetLinx Master’s

connection

information

FIG. 73 System Settings page

94 VG-Series Modero Touch Panels