AMX NXD/NXT-1500VG, NXD/NXT-1700VG, NXD/NXT-1200VG manual Install the 802.11g mini-PCI Wireless Card

Touch Panel Accessories

6.In a single motion, carefully pull the outer housing up and then out (away from the LCD panel) to expose the internal circuit board (FIG. 19). The NXA-RGB card is available within both the optional RGB Kit and NXA-RGBKIT upgrade.

7.Unscrew the Stereo Output nut from the Stereo Output jack.

8.Firmly grab the existing connector plate and slide it up and away from the base. This part is later replaced with the RGB connector plate.

Step 2: Install the 802.11g mini-PCI Wireless Card

1.Discharge any static electricity from your body by touching a grounded metal object.

2.Locate the mini-PCI card connector on the main board (FIG. 16 and FIG. 17).

Outer Housing

NXA-PCI80211G wireless card location

I/O connector plate

Eight Housing
Screws	Compact Flash card

FIG. 16 Location of the NXA-PCI80211G wireless card on the NXT board

FIG. 17 Location of the mini-PCI card connector on main board

If you have previously installed an NXA-RGB card, it must first be removed prior to gaining access to the mini-PCI connector on the board.

3.Carefully remove the gold-tipped terminal ends of the antenna from their factory default connectors on the main board. The antenna is secured at this location to restrict its movement prior to connection to a wireless card.

4.Firmly grasp the NXA-PCI80211G mini-PCI card (from the edges) and insert the pins (at a 25° angle) into the opening on the connector (FIG. 18).

38 VG-Series Modero Touch Panels