AMX NXD/NXT-1500VG, NXD/NXT-1700VG, NXD/NXT-1200VG Upgrading Accessory Devices via an IP Address

Upgrading Modero Firmware

Selected Firmware file Description field for selected KIT file

Firmware download status

Device value and System number must match the values

listed in the Workspace window

FIG. 98 Send to NetLinx Device dialog (showing Modero firmware update via IP)

11.Click Close (after the panel reboots) to return to the main program.

12.Right-click the associated System number and select Refresh System. This causes a refresh of all project systems, establishes a new connection to the Master, and populates the System list with devices on your particular system.

Upgrading Accessory Devices via an IP Address

The following accessory devices are firmware upgradeable:

NXA-BASE/B Battery Base (FG2255-10)

NXA-RGB card (FG2260)

NXA-AVB/RGB Breakout Box (FG2254-11)

These devices are not given a unique device numbers which would ordinarily appear within the Online Tree tab of NetLinx Studio. They appear below the target which they are either communicating with (NXA-AVB/RGB) or a part of (NXA-BASE/B or NXA-RGB card) as seen below in FIG. 99.

The only way to upgrade the firmware of an accessory item is to send the accessory’s firmware through a target panel. Its this panel’s device number which is entered within the Send to NetLinx Device transfer dialog in Studio.

128 VG-Series Modero Touch Panels