AMX NXD/NXT-1500VG, NXD/NXT-1700VG, NXD/NXT-1200VG manual Pages, Keyboard Layout

Firmware Pages and Descriptions

Protected Setup Page Elements (Cont.)

System Recovery: Allows you to either reset the touch panel to factory default settings and/or wipe out all existing touch panel pages:

	• The Reset System Settings button allows a user to wipe out all current
	configuration parameters on the touch panel (such as IP Addresses, Device
	Number assignments, Passwords, and other presets).
	- Pressing this button launches a Confirmation dialog (FIG. 118) which asks
	you to confirm your selection.
	- This dialog is configured with a delay timer that does not enable the YES
	button for 5 seconds. This delay provides an additional amount of time for
	the user to confirm their decision.
	• The Remove User Pages button allows you remove all current TPD4 touch
	panel pages currently on the panel (including the pre-installed AMX Demo
	pages).
	- Pressing this button launches a Confirmation dialog (FIG. 118) which asks
	you to confirm your selection.
	- This dialog is configured with a delay timer that does not enable the YES
	button for 5 seconds. This delay provides an additional amount of time for
	the user to confirm their decision.
Keyboard Layout:	Displays the listing of supported international keyboard settings. The following
(build 2.60 or higher)	list allows the end-user to specify which international keyboard is being
	connected to the Modero touch panel and then which characters should be
	reflected within the G4 Computer Control and TakeNote applications:
	- None (default), Spanish, Italian, French, German, Swiss, UK, and US
	Note: You must be using a standard 101 button keyboard to accurately
	utilize this feature.
	• Modero uses the open-source VNC character standards to transmit the
	character information to a target device such as a PC.
	• One of the issues which occurred in the past was that some 101-key foreign
	keyboard character sets were being incorrectly represented via the Computer
	Control and Take Note applications.
	• For example: Spanish keyboards consisting of Castilian character sets such
	as tilde (é) were being miscommunicated by the VNC application to the
	source computer and as a result, passwords were not properly being entered.
	• The VNC - Computer Control keyboard drivers found in earlier Modero
	firmware (build 57 or earlier) were using an English type/character set which
	was not fully utilizing all available foreign characters.
	• Several different countries have produced 101-key international keyboards,
	each with their own unique set of keys occupying the keyboard. Several of
	these keys are specific to the language they are used with.

You have a wait time of 5 seconds before the YES option is enabled.

FIG. 118 Protected Setup page-System Recovery confirmation dialog

VG-Series Modero Touch Panels 155