AMX NXD/NXT-1200VG, NXD/NXT-1500VG Lights when receiving or Transmitting Ethernet Data packets

Installation Procedures: 17" Panels

3.Verify the connection of the 2-pin 3.5 mm mini-Phoenix to the power supply.

Audio/Video Port: Connections and Wiring

The following table shows the signal and pinout/pairing information used on the RJ-45 Audio and Video connections.

Audio/Video RJ-45 Pinout Information

Pin	Wire Color	Function	Polarity
1	Orange/White	Right Audio In	+
2	Orange	Right Audio In	-
3	Green/White	Video In	-
4	Blue	Mic Out	-
5	White/Blue	Mic Out	+
6	Green	Video In	+
7	White/Brown	Left Audio In	+
				TIA 568B
8	Brown	Left Audio In	-

(female)

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

(male)

RJ-45 connector - pin configurations

Refer to the Installing CAT5 Suppression Ferrites section on page 30 for detailed information on how to install the necessary number of CAT5 Suppression Ferrites on the Black A/V RJ-45 cable connected to the panel.

Ethernet/RJ-45 Port: Connections and Wiring

FIG. 65 describes the blink activity for the Ethernet 10/100 Base-T RJ-45 connector and cable. The Ethernet cable is connected to the rear of Table Top and side of the Wall Mount panels.

A - Activity LED (yellow)	A		L
lights when receiving or
transmitting Ethernet
data packets
		ETHERNET
		10/100

FIG. 65 Ethernet connector (showing communication and connection LEDs)

L - Link LED (green) lights when the Ethernet cables are connected and terminated correctly.

88 VG-Series Modero Touch Panels