AMX NXD/NXT-1500VG, NXD/NXT-1700VG, NXD/NXT-1200VG manual RAF-resource name,data

Programming

Dynamic Image Commands (Cont.)

^RAF

Add new resources.

Adds any and all resource parameters by sending embedded codes and data.

Syntax:

"'^RAF-<resource name>,<data>'"

Variable:

resource name = 1 - 50 ASCII characters.

data = Refers to the embedded codes, see table below.

Embedded Codes:

Parameter	Embedded Code	Description
protocol	’%P<0-1>’	Set protocol. HTTP (0) or FTP (1)
user	’%U<user>’	Set Username for authentication.
password	’%S<password>’	Set Password for authentication.
host	’%H<host>’	Set Host Name (fully qualified
		DNS or IP Address).
file	’%F<file>’	Full path to the location of the file or
		program that will return the resource.
		The path must be a valid HTTP URL
		minus the protocol and host. The
		only exception to this is the inclusion
		of special escape sequences and in
		the case of the FTP protocol, regular
		expressions.
path	’%A<path>’	Set Directory path. The path must
		be a valid HTTP URL minus the
		protocol, host, and filename. The
		only exception to this is the
		inclusion of special escape
		sequences and in the case of the
		FTP protocol, regular expressions.
refresh	’%R<refresh 1-65535>’	The number of seconds between
		refreshes in which the resource is
		downloaded again. Refreshing a
		resource causes the button
		displaying that resource to refresh
		also. The default value is 0 (only
		download the resource once).
newest	’%N<0-1>’	Set the newest file. A value of 1
		means that only the most recent file
		matching the pattern is downloaded.
preserve	’%V<0-1>’	Set the value of the preserve flag.
		Default is 0. Currently preserve has
		no function.

Example:

SEND_COMMAND Panel,"'^RAF-New Image,%P0%HAMX.COM%ALab/ Test_file%Ftest.jpg'"

Adds a new resource. The resource name is ’New Image’, %P (protocol) is an HTTP, %H (host name) is AMX.COM, %A (file path) is Lab/Test file, and %F (file name) is test.jpg.

230 VG-Series Modero Touch Panels