W983 Stacker/W863 Dryer Operating Guide
WARNING: The Stacker (when used with the Dryer) requires its own separate 15 amp branch circuit for power. Do not plug other appliances (such as your printer) into the same circuit as the Stacker/Dryer.
Optional Stand for Power Stacker
1
2
The illustration above shows the location of these stand components.
1Height Adjustment Knob - used to adjust the height of the stacker so it can be aligned with your printer or to operator level.
2Casters (in circles above) - allows for easier movement of stacker. Two are locking casters for holding the stacker in place.
8 | SV61228 Rev. A |