W983 Stacker/W863 Dryer Operating Guide
Dryer Operation
The Dryer contains only one operator control, a power on/off switch with an associated indicator. This switch is used to turn power to the Dryer on or off. The switch will light when on.
Since the Dryer receives its power from a dedicated power outlet on the associated Stacker, this switch will light (if set at on) only when the power switch on the Stacker is switched on.
Therefore, when the power switch on the Dryer is left in the ON position, the Dryer will activate only when the conveyor belts start to move. This effectively causes the Dryer to operate only when needed (when mailpieces are conveyed under it to be dried). When the conveyor stops, the Dryer will automatically switch off.
IMPORTANT: Be sure to observe all labeled warnings and precautions on Dryer (see below).
CAUTION:Turn Power Off | CAUTION: |
When Not In Use. Only Operate | Do not operate |
With Conveyor Moving. | unattended. |
CAUTION:
Hot Surface
CAUTION: Keep air intake vents free at all times.
WARNING: Dryer will ignite combustible materials. Keep all items clear of this machine, except envelopes specified for use with this machine.
CAUTION: Disconnect power before changing fuse. For continued protection against risk of fire, replace only with same type and rating of fuse.
22 | SV61228 Rev. A |