W983 Stacker/W863 Dryer Operating Guide
W983 Power Stacker Controls and Indicators
Operator Panel
13
42
1Power Switch - This is a rocker switch with indicator light. Press the top in to turn the Stacker on. Press the bottom in to turn the Stacker off.
2Speed Adjustment Knob - To eliminate possible ink smudging of the printed address, you can vary the speed of the conveyor belts so that the mailpieces are separated (do not overlap) as they are delivered to the belt. Turn clockwise to increase speed and counterclockwise to decrease speed.
3Auto/Manual Switch - This is a rocker switch. Press the top in to select Automatic mode. In automatic mode, the Stacker belts will move when the printer is feeding mailpieces and stops the printer when the Stacker is full. Press the bottom in to select manual mode. In Manual mode, the Stacker runs constantly (independent of the printer).
4Stacker Full Light - This LED flashes when the Stacker ramp is full.
SV61228 Rev. A | 5 |