W983 Stacker/W863 Dryer Operating Guide
WARNING: The Dryer with Stacker combination requires its own separate 15 amp branch circuit for power. Do not plug other appliances (such as your printer) into the same circuit as the Dryer/Stacker.
Dryer Job Setup
You will be required to check and make the following adjustments when you change from one job to another job.
Adjust Dryer Height
You will have to adjust the height of the Dryer whenever the following changes drastically from the previous job:
•speed of the conveyor on the Stacker
•the size of the material being dried
•how much ink is used
The height handle is used to raise or lower the Dryer. It has six positions.
Height Adjustment Handle | Release Lever | Six Positions |
| (under handle top) | (see circle) |
Height is adjusted by squeezing the release lever under handle top, lifting the Dryer unit to the new position, and then releasing the handle in the new slot position.
SV61228 Rev. A | 23 |