W983 Stacker/W863 Dryer Operating Guide
Conveyor Deck
1
3
2
4
1Media Stop - This plate is adjusted so that mailpieces from the printer hit the stop and drop flat onto the conveyor belt. The height adjustment handles materials of varying thicknesses.
2Stacker Full Arm Fixture - Sets the stop position for mailpieces on the ramp and raises/lowers full arm.
3Stacker Full Arm - This arm is adjusted so that the mailpieces stack in an orderly sequence for retaining presort order and stop the printer when the Stacker is full.
4Hold Down Springs and Rollers - These springs and rollers are adjusted to keep the mailpieces in contact with the conveyor belts.
6 | SV61228 Rev. A |