JVC PIM171200 manual Storing stations in memory, FM station automatic preset SSM

Page 10

ENGLISH

2 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display.

DIRECTORY

FILEDISC

TRACK

CEQ

ST RPT

RND

TP PTY

3 Tune in to a station you want while “M” is flashing.

Press ¢ to tune in to stations of higher frequencies.

Press 4 to tune in to stations of lower frequencies.

If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

If you hold down the button, the frequency keeps changing (50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button.

When an FM stereo broadcast is hard to receive:

1 Press BAND MODE (M) while listening to an FM stereo broadcast (the ST indicator lights up while receiving an FM stereo broadcast). “MODE” appears on the display, and the number buttons can work as different function buttons.

2 Press MONO, while “MODE” is still on the display, so that the MO indicator lights up on the display.

The sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).

Each time you press the button, the MO indicator lights up and goes off alternately.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

1 Select the FM band (FM1 – 3) you want to store FM stations into.

ATT

1 Press SOURCE ATT to

SOURCE

select FM as the source.

 

MODE

2 If necessary, press and

BAND

 

Mhold BAND MODE (M) to select the FM band number (FM1, FM2 or FM3).

Each time you press and hold the button, the FM band changes as follows:

FM1 FM2 FM3

2 Press and hold both buttons for more than 2 seconds.

SSM

BAND

DISP MODE

D M

DIRECTORY

FILEDISC

TRACK

CEQ

ST RPT

RND

TP

“SSM” appears, then disappears when automatic preset is over.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons

No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

10

Image 10
Contents KD-LX111R Retain this password for futureKD-LX333R For Customer UseHow to reset your unit Position And Reproduction Of LabelsContents Location of the Buttons How to use the number buttonsControl panel Preparing the remote controller Installing the batteryRemote controller To turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSet the hour Setting the clockFinish the setting Set the minuteSearching a station automatically Auto search Radio Basic OperationsSearching a station manually Manual search Tune in to a station you want while M is flashing FM station automatic preset SSMStoring stations in memory Select the FM band FM1 3 you want to store FM stations intoTune in to a station in this example, of 88.3 MHz Manual presetSelect the band in this example, FM1 SourceRDS Operations What you can do with RDSPress TP/PTY T to activate TA Standby Reception Using TA Standby ReceptionSame programme can be received on Different frequencies TP/PTY T againUsing PTY Standby Reception To store your favorite programme types FM station To search your favorite programme typeThan 2 seconds while listening to an Select one of the PTY codesChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment FrequencyPTY codes To stop play and eject the CD CD OperationsPlaying a CD Open the loading slotLocating a track or a Prohibiting CD ejection Playing a CD TextTo play back only intros Intro Scan FAD Sound AdjustmentsWhat is BBEII? BBEActivate custom equalizer CEQ Select the sound mode you wantFor Preset values User Rock Classic Jazz HIP HOP PopsRepeat steps 4 and 5 to adjust the other items Storing your own sound adjustmentsSelect the items you want to adjust Repeat the same procedure to store other sound modesOther Main Functions Basic ProcedurePreferred Setting Mode PSM items 24H/12HPress SEL S to finish the setting To select the scroll mode Scroll To select the dimmer mode DimmerTo adjust the display contrast level To set the clock display Clock DispTo change the FM tuner selectivity To adjust the line input level Line ADJ Only for KD-LX333RIf Filter Cruise 1 Cruise Cruise OFF To adjust the volume increase rateMode changes as follows As you turn the control dial, the Audio CruiseSelect a source you want to assign a name to Assigning names to the sourcesIf Audio Cruise does not function correctly Sources Maximum numberSelect a character To erase the input charactersSelect the character set you want while is flashing Available charactersRegistering the password Using the security lockHow to Use the Provided Code Sticker When Security Lock works? To change the passwordSelect the CD automatic changer CD-CH CD Changer OperationsPlaying CDs To go to the next tracks or the previous tracksTo show the CD Text information Selecting CD playback modesTo go to a particular disc directly PlayREPEAT1 REPEAT2 To play back tracks repeatedly RepeatINTRO1 INTRO2 Select the external component Using a subwooferAdjusting the sound on Operate the external componentWhat is DAB system? DAB Tuner OperationsService name Ensemble name Channel number Frequency Storing DAB services in memorySelect a service you want to listen to To tune in a particular ensemble without searchingTuning in to a preset DAB service What you can do more with To adjust the DAB volume levelWhile receiving a DAB service To use Alternative ReceptionTroubleshooting Symptoms Causes RemediesNo MAG appears on No magazine is loaded Insert the magazine Appears on Security lock is in use Enter the passwordLonger screws than specified Maintenance Handling CDsMW Tuner SpecificationsFM Tuner LW TunerHaving Trouble with operation? Répétez la même procédure et choisissez Demo on à l’étape Pour mettre de nouveau la démonstration en serviceSo deaktivieren Sie die Demonstration Zo annuleert u de demonstratieSound is distorted Fuse blowsNo sound from the speakers Unit becomes hotEinbau auf jeden Fall aufbewahren Bewaar de hendels nadat u het apparaat hebt geïnstalleerdUse modified wiring 2 if the unit does not turn on Original wiringModified wiring See diagram CSpeaker leads of this unit unused Koppel de speakers van dit apparaat los enVerbind ze aan de versterker ’enceintes de cet appareil inutilisés