JVC PIM171200 manual Preparing the remote controller, Installing the battery

Page 5

Preparing the remote controller

This section is only for KD-LX333R.

KD-LX111R can be remotely controlled with an optionally purchased remote controller. We recommend that you use remote controller RM-RK31 or RM-RK50 with your unit.

(Ex.: When you are using RM-RK31.)

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

Remote sensor

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1.Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball-point pen or a similar tool.

2)Remove the battery holder.

(back side)

1)

2)

	2. Place the battery.
	2. Place the battery.			ENGLISH
	Slide the battery into the holder with the +			ENGLISH
	Slide the battery into the holder with the +
	side facing upwards so that the battery is
	fixed in the holder.
			Lithium coin battery
			Lithium coin battery
			(product number:
			CR2025)
			CR2025)

3. Return the battery holder.

Insert again the battery holder pushing it until

you hear a clicking sound.

(back side)

WARNING:

•Store the battery in a place where children cannot reach.

If a child accidentally swallows the battery, consult a doctor immediately.

•Do not recharge, short, disassemble or heat the battery or dispose of in a fire.

Doing any of these things may cause the battery to give off heat, crack or start a fire.

•Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack or start a fire.

•When throwing away or saving battery, wrap it in tape and insulate; otherwise, it may cause the battery to give off heat, crack or start a fire.

•Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack or start a fire.

CAUTION:

Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

5

Image 5

Contents KD-LX333R Retain this password for futureKD-LX111R For Customer UsePosition And Reproduction Of Labels How to reset your unitContents Control panel How to use the number buttonsLocation of the Buttons Installing the battery Preparing the remote controllerRemote controller To drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsFinish the setting Setting the clockSet the hour Set the minuteSearching a station manually Manual search Radio Basic OperationsSearching a station automatically Auto search Storing stations in memory FM station automatic preset SSMTune in to a station you want while M is flashing Select the FM band FM1 3 you want to store FM stations intoSelect the band in this example, FM1 Manual presetTune in to a station in this example, of 88.3 MHz SourceWhat you can do with RDS RDS OperationsSame programme can be received on Different frequencies Using TA Standby ReceptionPress TP/PTY T to activate TA Standby Reception TP/PTY T againUsing PTY Standby Reception To store your favorite programme types Than 2 seconds while listening to an To search your favorite programme typeFM station Select one of the PTY codesAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station FrequencyPTY codes Playing a CD CD OperationsTo stop play and eject the CD Open the loading slotLocating a track or a To play back only intros Intro Scan Playing a CD TextProhibiting CD ejection What is BBEII? Sound AdjustmentsFAD BBEFor Preset values Select the sound mode you wantActivate custom equalizer CEQ User Rock Classic Jazz HIP HOP PopsSelect the items you want to adjust Storing your own sound adjustmentsRepeat steps 4 and 5 to adjust the other items Repeat the same procedure to store other sound modesPreferred Setting Mode PSM items Basic ProcedureOther Main Functions 24H/12HPress SEL S to finish the setting To adjust the display contrast level To select the dimmer mode DimmerTo select the scroll mode Scroll To set the clock display Clock DispIf Filter To adjust the line input level Line ADJ Only for KD-LX333RTo change the FM tuner selectivity Mode changes as follows To adjust the volume increase rateCruise 1 Cruise Cruise OFF As you turn the control dial, the Audio CruiseIf Audio Cruise does not function correctly Assigning names to the sourcesSelect a source you want to assign a name to Sources Maximum numberSelect the character set you want while is flashing To erase the input charactersSelect a character Available charactersHow to Use the Provided Code Sticker Using the security lockRegistering the password To change the password When Security Lock works?Playing CDs CD Changer OperationsSelect the CD automatic changer CD-CH To go to the next tracks or the previous tracksTo go to a particular disc directly Selecting CD playback modesTo show the CD Text information PlayINTRO1 INTRO2 To play back tracks repeatedly RepeatREPEAT1 REPEAT2 Adjusting the sound on Using a subwooferSelect the external component Operate the external componentDAB Tuner Operations What is DAB system?Select a service you want to listen to Storing DAB services in memoryService name Ensemble name Channel number Frequency To tune in a particular ensemble without searchingTuning in to a preset DAB service While receiving a DAB service To adjust the DAB volume levelWhat you can do more with To use Alternative ReceptionSymptoms Causes Remedies TroubleshootingLonger screws than specified Appears on Security lock is in use Enter the passwordNo MAG appears on No magazine is loaded Insert the magazine Handling CDs MaintenanceFM Tuner SpecificationsMW Tuner LW TunerHaving Trouble with operation? So deaktivieren Sie die Demonstration Pour mettre de nouveau la démonstration en serviceRépétez la même procédure et choisissez Demo on à l’étape Zo annuleert u de demonstratieNo sound from the speakers Fuse blowsSound is distorted Unit becomes hotBewaar de hendels nadat u het apparaat hebt geïnstalleerd Einbau auf jeden Fall aufbewahrenModified wiring Original wiringUse modified wiring 2 if the unit does not turn on See diagram CVerbind ze aan de versterker Koppel de speakers van dit apparaat los enSpeaker leads of this unit unused ’enceintes de cet appareil inutilisés