ENGLISH
4 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.
EQ
17
DIRECTORY
FILEDISC
TRACK
ST RPT | RND | TP PTY |
“PI” flashes for a few seconds.
5 Repeat the above procedure to store other DAB services into other preset numbers.
Notes:
•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.
•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for
example, during battery replacement). If this occurs, preset the DAB services again.
Tuning in to a preset DAB service
You can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, see page 39.
1 Select the DAB tuner (DAB1 – 3).
ATT | 1 Press SOURCE ATT to select |
SOURCE | DAB tuner as the source. |
| |
BAND | 2 If necessary, press and hold |
MODE |
MBAND MODE (M) repeatedly to select the DAB band number (DAB1, DAB2 or DAB3).
Each time you press and hold the button, the DAB band changes as follows:
D1 D2 D3 (DAB1) (DAB2) (DAB3)
2 Select the number (1 – 6) for the preset DAB service you want.
EQ | MONO |
| INT | RPT | RND |
1 7 | 2 8 | 3 9 | 10 | 5 11 | 612 |
40