4 Select a service you want to listen to.
MODE | 1 Press BAND MODE (M). |
BAND |
|
M“MODE” appears on the display.
2 Press 
¢ or 4 
to select a service you want, while “MODE” is still on the display.
To change the display information while tuning into an ensemble
Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press DISP (D).
Each time you press the button, the following information appears for a while on the display.
Service name
Ensemble name
Channel number
Frequency
To tune in a particular ensemble without searching:
1 Press SOURCE ATT to select DAB tuner as the source.
2 Press BAND MODE (M) repeatedly to select the DAB band (DAB1, DAB2 or DAB3).
3 Press and hold 
¢ or 4 
for more than 1 second.
4 Press 
¢ or 4 
repeatedly until the ensemble you want is reached.
•If you hold down the button, the ensemble keeps changing until you release the button.
Storing DAB services in memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1 Select the DAB tuner (DAB1 – 3).
ATT | 1 Press SOURCE ATT to select | |
SOURCE | ||
DAB tuner as the source. | ||
| ||
BAND | 2 If necessary, press and hold | |
MODE |
MBAND MODE (M) repeatedly to select the DAB band number (DAB1, DAB2 or DAB3).
Each time you press and hold the button, the DAB band changes as follows:
D1 
D2 
D3 (DAB1) (DAB2) (DAB3)
2 Tune in to an ensemble you want.
3 Select a service of the ensemble you want.
MODE | 1 Press BAND MODE (M). |
BAND |
|
M“MODE” appears on the display.
2 Press 
¢ or 4 
to select a service you want, while “MODE” is still on the display.
ENGLISH
CONTINUED ON THE NEXT PAGE
39