SECTION VIII
TECHNICAL INFORMATION
A. DATA LABEL
Contact American Dryer Corporation
When contacting American Dryer Corporation certain information is required to ensure proper service or parts information from American Dryer. This information is on the data label located on the inside of the control door. When contacting American Dryer please have the model and serial numbers handy.
1.MODEL NUMBER - The model number is an ADC number which describes the size of the dryer and type of heat (gas, electric or steam).
2.SERIAL NUMBER - The serial number allows ADC to gather information on your particular dryer.
3.MANUFACTURING CODE NUMBER - The manufacturing code number is issued by ADC and describes all possible options on your particular model.
4.TYPE OF HEAT - Describes the type of heat; gas (natural or L.P.), steam or electric.
5.HEAT INPUT - For gas dryers describes the heat input in British thermal units.
6.ORIFICE SIZE - Gives the number size of the drill used.
7.ELECTRIC SERVICE - Describes the electric service for your particular model.
8.GAS MANIFOLD - Describes the manifold pressure as taken at the gas valve.
9.APPLICABLE APPROVAL SEALS - I.E. American or Canadian Gas associations.
41