American Dryer Corp ML-130DR, ML-130 III installation manual 113335

Page 5

! WARNING

Articles left in the dryer after the drying and cooling cycles have been completed can create a fire hazard.

Do not operate steam dryers with more than 125 psi (8.61 bar) steam pressure. Excessive steam pressure can damage steam coil and/or harm personnel.

Replace leaking flexible hoses or other steam fixtures immediately. Do not operate the dryer with leaking flexible hoses. Personal injury may result.

Read and follow all caution and direction labels attached to the dryer.

For safety, proper operation, and optimum performance, the dryer must not be operated with a load less than sixty-six percent (66%), 80 lb (36.3 kg) of its rated capacity.

! WARNING

You must disconnect and lockout the electric supply and the gas supply or the steam supply before any covers or guards are removed from the machine to allow access for cleaning, adjusting, installation, or testing of any equipment per OSHA standards.

IMPORTANT: Dryer must be installed in a location/ environment, which the ambient temperature remains between 40° F (4.44° C) and 130° F (54.44° C).

Notes ______________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

Notes ______________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

____________________________________________________________

113335 - 12

www.amdry.com

5

Image 5
Contents American Dryer Corporation ML-130 III / ML-130DR Installation ManualDate of Purchase Model no RESELLER’S Name Serial Numbers Retain This Manual in a Safe Place for Future ReferenceTable of Contents Personal injury or fire could result Safety PrecautionsWhat To Do If You Smell Gas 113335 Electric ML-130 SpecificationsML-130 Specifications ML-130DR Specifications ML-130DR Specifications Unpacking/Setting Up Installation ProceduresLocation Requirements Leveling DryerExhaust Transition Piece Gas and Electric Only Dryer Enclosure RequirementsTo Remove Top Console Module General Exhaust Ductwork Information Fresh Air Supply RequirementsExhaust Requirements Single Dryer Venting Outside Ductwork ProtectionML-130 Multiple Dryer Common VentingElectrical Information Electrical Service SpecificationsML-130DR Multiple Dryer Venting Electrical RequirementsElectric Model Dryers Electrical ConnectionsGas Model and Steam Model Dryers Grounding Gas InformationGas Supply Fire or explosion could resultML-130DR ML-130Steam Information Installation InstructionsSteam Coil pH Level Steam Requirements, High PressureAir Requirements Compressed Air Supply Air Pressure Steam Damper Air System ConnectionsAir Connection Steam Damper System OperationPreoperational Test Preparation for OperationHeat Circuit Operational Test Gas Models Electric ModelsOperating Instructions Shutdown InstructionsWarranty Information Service/Parts InformationRoutine Maintenance Lubrication Reversing Timer Spin/Dwell AdjustmentsData Label Information For Models with DSI Module Type Procedure for Functional Check Replacement ComponentsMicroprocessor Controller Computer Board Fire Suppression System Manual Reset Burner Hi-Limit InstructionsTypical water supply Optional Manual Bypass ADC Part No 12 07/31/08