J.PREOPERATIONAL INSTRUCTIONS COIN MODELS
1.Microprocessor Controller (Computer)
a.When the microprocessor controller (computer) is in the ready state, the liquid crystal display (L.C.D.) screen will display “Ready, Insert $XX.XX (amount) to Start”.
b.Insert coin(s). Once the correct “Amount to Start” has been inserted, the L.C.D. will display “Select Temperature”.
c.Select temperature by pressing “HI,” “MED,” or “LO.” The cycle will start and the L.C.D. will display the Dry Cycle selected and the remaining time.
d.The dryer will continue through the drying and cooling cycles, until the vended time has expired.
NOTE: To stop dryer, open main door or press the “PAUSE” key. Continuation of the cycle will resume only after the door has been closed and any of the three (3) temperature selection is pressed.
e.Upon completion of the drying and cooling cycles, the tone (buzzer) will sound and the dryer will go into the
IMPORTANT: For more detailed information regarding the microprocessor controller (computer) on your dryer, refer to the microprocessor user’s manual included with the dryer.
2.Mechanical Drop/Rotary Coin Meter or Slide Coin Meter
a.Insert coin and turn knob (rotary type meter), or for slide meter unit, push in coin chute.
b.Select Temperature.
c.Push the “Start” button.
d.To stop dryer, open the main door.
26 | American Dryer Corp. | 113222 - 5 |