Maytag W10312954A, W10312957A - SP To change the drying settings, Sensor Cycles, Timed Cycles

Page 11

5. Adjust cycle settings, if desired

+

-

temp level

dryness level

damp signal

 

 

 

11-cycle model shown

You may adjust different settings, depending on whether you have selected a Sensor Cycle, Timed Cycle, or Steam Cycle. See the Cycle Guide for detailed information.

NOTE: Not all options and settings are available with all cycles. Not all cycles are on all models.

Sensor Cycles:

You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.

Sensor cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

7. Press and hold START/PAUSE to begin cycle

Press and hold the START/PAUSE button to begin the cycle.

8. Remove garments promptly after cycle is finished

+

 

 

-

 

 

temp level

dryness level

damp signal

11-cycle model shown

 

 

Timed Cycles:

When you select a Timed Cycle, the default time appears in the display. Use the + and - buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments.

The default temperature may be changed by pressing the Temp Level button until the desired dry temperature is lit.

+

-

temp level dryness leve

 

wrinkle

 

Promptly remove garments after cycle

prevent

without steam

 

has completed to reduce wrinkling. If you will be unable to remove the load

promptly, select the Wrinkle Prevent/Wrinkle Prevent with Steam option before pressing START/PAUSE.

Custom Refresh with Steam:

The cycle time defaults to 15 minutes, for 1-4 items.

For larger loads, you may add additional time up to 50 minutes, in 5 minute increments, using the Timed Dry Adjust + and - buttons.

6. Select any additional options

11-cycle model shown

Add additional options such as Reduce Static, Wrinkle Prevent/ Wrinkle Prevent with Steam and/or Steam Boost by pressing the button for that option.

NOTE: Not all options and settings are available with all cycles.

Changing the Sensor Cycle settings to increase drying time

If all your loads on all Sensor Cycles are consistently not as dry as you would like, you may change the default settings to increase the default dryness level.

Your sensor drying settings can be adjusted to adapt to different installations, environmental conditions or personal preference. This change is retained and will affect all of your sensor cycles, not just the current cycle/load. There are 3 drying settings, which are displayed using the time display:

01Factory preset dryness level.

02Slightly drier clothes, 15% more drying time.

03Much drier clothes, 30% more drying time.

To change the drying settings:

NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (the power button is off) to adjust the default settings.

1.Before starting a cycle, press and hold the Temp Level button for 6 seconds.

2.Press the Dryness Level button to select the dryness level shown in the time display: 01, 02, or 03.

3.Press START/PAUSE to save the new dryness level setting.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents W10312954A W10312957A SP Use & Care Guide Guide d’utilisation et d’entretienElectronic Dryer Dryer SafetyPage Worksurface PedestalStack Kit Good air flow Check Your Vent System for Good AIR FlowTimed DRY Adjust for Timed Cycles Control Panel and FeaturesSteam Boost on some models Reduce Static on some modelsLoad Size Recommendations Temperature Level TimeCycle Guide Sensor Cycles OptionsCycle Guide Steam Cycles Cycle Drying Default Available Items to dryItems to Cycle Drying Default Available Refresh Cycle Guide Timed CyclesClean the lint screen Using Your DryerCustom Refresh with Steam To change the drying settingsSensor Cycles Timed CyclesTo use the drying rack Cycle Status IndicatorsAdditional Features Using the Drying RackDryer Care Cleaning the Dryer LocationCleaning the Dryer Interior Cleaning the Lint ScreenSpecial Instructions For Steam Models VACATION, STORAGE, and Moving CareUnusual Noise TroubleshootingIf you experience Possible Causes Solution Dryer OperationDrying time Dryer Displaying Code Message This limited warranty does not cover Maytag Laundry WarrantySécurité DE LA Sécheuse Page Surface de travail Piédestal deEnsemble de superposition Circulation d’air adéquate Page Bouton START/PAUSE mise en marche/pause Tableau DE Commande ET CaractéristiquesMise sous tension/annulation Dryness Level niveau de séchage Damp Signal signal d’humiditéSteam Boost puissance vapeur sur certains modèles Témoins lumineux de programmeOptions disponibles Recommandations concernant le volume de la chargeGuide DE Programmes Programmes DE Détection De séchage Séchage Défaut DisponiblesTempérature Guide DE PROGRAMMES-PROGRAMMES Avec VapeurDurée Articles à Par Options Sécher De séchage DéfautNettoyer le filtre à charpie Utilisation DE LA SécheuseRafraîchissement personnalisé avec vapeur Programmes de détectionProgrammes minutés Pour changer les réglages de séchage Témoins Lumineux DE ProgrammeUtilisation de la grille de séchage Caractéristiques SupplémentairesUtilisation DE LA Grille DE Séchage Nettoyer LE Filtre À Charpie Nettoyer L’EMPLACEMENT DE LA SécheuseEntretien DE LA Sécheuse Retirer LA Charpie AccumuléeInstructions Spécifiques Pour LES Modèles Vapeur UN Entreposage OU UN DéménagementSons inhabituels DépannageFonctionnement de la sécheuse Résultats de la sécheuse Résultats de la sécheuse suite Message codé La présente garantie limitée ne couvre pas Garantie DES Appareils DE Buanderie MaytagPage U.S.A. and Canada U.S.A
Top Page Image Contents