Maytag W10312954A, W10312957A - SP manual Reduce Static on some models, Steam Boost on some models

Page 7

5LED DISPLAY AND SETTINGS BUTTONS

When you select a cycle, its default settings will light up and the Estimated Time Remaining (for Sensor Cycles) or actual time remaining (for Timed Cycles) will be displayed.

Use the buttons along the bottom of the display to adjust settings. See Cycle Guide for available settings on each cycle. Not all settings are available with all cycles.

Cycle Status Lights

The indicator bar at the top of the display will let you know what stage of the drying cycle is in process. For more information on each stage, see “Cycle Status Indicators”.

Temp Level

When using Timed Cycles or Auto Refresh, you may select a dry temperature based on the type of load you are drying. Use the warmest setting safe for the garments in the load. Follow garment label instructions.

NOTE: Sensor Cycles use a preset temperature that is not adjustable.

Dryness Level

You may adjust the Dryness Level on Sensor Cycles, if desired.

NOTE: Dryness Level is for use with Sensor Cycles only.

Damp Signal

When selected, a signal will sound during the drying cycle when the load is damp but not completely dry. This will allow you to take clothes out of the load that do not need to dry completely. This option is available on Heavy Duty, Normal, Denim, Bedding, Wrinkle Control, and Delicate cycles.

6OPTION BUTTONS

Use these buttons to select available options for your dryer. Not all cycles and options are available on all models.

Wrinkle Prevent/Wrinkle Prevent with Steam (on some models)

If you will be unable to remove a load immediately, press Wrinkle Prevent to add up to 150 minutes of periodic tumbling to help reduce wrinkling. On models with Wrinkle Prevent with Steam, a short steam cycle is added after 60 minutes to help smooth out wrinkles.

NOTE: On models with Wrinkle Prevent with Steam, you may turn off Steam by pressing and holding the Wrinkle Prevent button until - St appears in the display. The dryer will remember this setting for future loads. To turn Steam back on, press and hold the Wrinkle Prevent button again for several seconds.

Drum Light

Press to turn the LED drum light on or off. The light will also turn on when the door is open, and turn off automatically after about 5 minutes.

Cycle Signal

Use this button to turn the signal indicating the end of a drying cycle on or off, or to adjust the volume of the signal.

NOTE: You may also turn off the tones that sound when a button is pressed. Press and hold the Cycle Signal button for about one second to turn button sounds on or off.

Control Lock

Use this button to lock the controls of the dryer and avoid an accidental change in cycle options or preferences during a drying cycle.

7REDUCE STATIC (on some models)

Press to add the Reduce Static option to a Sensor cycle. The dryer will automatically tumble, pause, and introduce a small amount of moisture into the load to help reduce static. This option adds approximately 8 minutes to the total cycle time.

8STEAM BOOST (on some models)

Steam Boost adds steam to the end of the Heavy Duty, Bedding, Normal, or Denim cycle to help smooth wrinkles. Steam Boost can be used with High or Medium heat settings.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents W10312954A W10312957A SP Use & Care Guide Guide d’utilisation et d’entretienElectronic Dryer Dryer SafetyPage Stack Kit PedestalWorksurface Good air flow Check Your Vent System for Good AIR FlowTimed DRY Adjust for Timed Cycles Control Panel and FeaturesSteam Boost on some models Reduce Static on some modelsLoad Size Recommendations Temperature Level TimeCycle Guide Sensor Cycles OptionsCycle Guide Steam Cycles Cycle Drying Default Available Items to dryItems to Cycle Drying Default Available Refresh Cycle Guide Timed CyclesClean the lint screen Using Your DryerCustom Refresh with Steam To change the drying settingsSensor Cycles Timed CyclesTo use the drying rack Cycle Status IndicatorsAdditional Features Using the Drying RackDryer Care Cleaning the Dryer LocationCleaning the Dryer Interior Cleaning the Lint ScreenSpecial Instructions For Steam Models VACATION, STORAGE, and Moving CareUnusual Noise TroubleshootingIf you experience Possible Causes Solution Dryer OperationDrying time Dryer Displaying Code Message This limited warranty does not cover Maytag Laundry WarrantySécurité DE LA Sécheuse Page Ensemble de superposition Piédestal deSurface de travail Circulation d’air adéquate Page Mise sous tension/annulation Tableau DE Commande ET CaractéristiquesBouton START/PAUSE mise en marche/pause Dryness Level niveau de séchage Damp Signal signal d’humiditéSteam Boost puissance vapeur sur certains modèles Témoins lumineux de programmeOptions disponibles Recommandations concernant le volume de la chargeGuide DE Programmes Programmes DE Détection De séchage Séchage Défaut DisponiblesTempérature Guide DE PROGRAMMES-PROGRAMMES Avec VapeurDurée Articles à Par Options Sécher De séchage DéfautNettoyer le filtre à charpie Utilisation DE LA SécheuseProgrammes minutés Programmes de détectionRafraîchissement personnalisé avec vapeur Pour changer les réglages de séchage Témoins Lumineux DE ProgrammeUtilisation DE LA Grille DE Séchage Caractéristiques SupplémentairesUtilisation de la grille de séchage Nettoyer LE Filtre À Charpie Nettoyer L’EMPLACEMENT DE LA SécheuseEntretien DE LA Sécheuse Retirer LA Charpie AccumuléeInstructions Spécifiques Pour LES Modèles Vapeur UN Entreposage OU UN DéménagementFonctionnement de la sécheuse DépannageSons inhabituels Résultats de la sécheuse Résultats de la sécheuse suite Message codé La présente garantie limitée ne couvre pas Garantie DES Appareils DE Buanderie MaytagPage U.S.A. and Canada U.S.A
Top Page Image Contents