3M eg4, eg3 user manual EdgeDock1

11

3MTMDetection Mangement Software (DMS)

Loading

3MTM Detection Management Software (DMS) is a software application designed by 3M Quest that runs under the Windows operating system. You can use DMS for a variety of functions related to the Edge dosimeter and with many other 3M Quest instruments. DMS has the ability to customize your set-up parameters, display data, manipulate data, and create reports.

To load DMS, follow the screen prompts.

It will automatically load the drivers for the EdgeDock1 and/or EdgeDock5. If loading from the 3M detection Internet site, please follow the directions online located: www.3m.com/detection or www.quest-technologies.com.

Depending on the kit you purchased, you may have an EdgeDock1 and/or an EdgeDock5. Both are designed similarly with the same LED indicators. The main difference with the EdgeDock5 is that it has five bays for docking, charging, and/or managing the dosimeters. If desired, the EdgeDock5 will charge all docked instruments at one time.

The docking station serves a dual-purpose role:

1.It is used to charge the battery on the dosimeter(s).

2.It is used to communicate between the software (DMS) and the dosimeter (i.e., import, export settings and measurement files).

Charging Indicator

Power Indicator

Charge contacts

Power connector

USB connector

Figure 2-4: EdgeDock1

053-644, Rev E Page 11 eg4 & eg3