Xte

mn100 Dual Digital Display

(p25)	DTW
	Distance To (active) Waypoint. The active Waypoint being
	the one to which the GPS is currently navigating. When the
	Waypoint has been named in the GPS the name will be
	displayed (first five digits only).
(p25)	DTW
	Distance To (active) Waypoint. The active Waypoint being
	the one to which the GPS is currently navigating. When the
	Waypoint has been named in the GPS the name will be
	displayed (first five digits only).
(p26)	XTE
	Cross Track Error as defined by the GPS Antenna.
(p27)	ETA
	Estimated Time of Arrival at the (active) Waypoint as
	calculated by the GPS Antenna.
(p28)	SEA
	Current Sea Temperature as measured by the sensor in the
	Speed Transducer.
(p29)	TIMER
	Countdown or elapsed time stopwatch.
	Press and hold for 1 second the		button and use the
	and	buttons to set the required countdown time in
	minutes, then press and hold for 1 second the			button to
	prepare to start the countdown.
	Press the	button quickly to start the countdown.
	The instrument will sound a single beep each 30 seconds
	until 1 minute remains when a beep will sound at 10 second
	intervals. The final 10 seconds will count down with a beep
	each second with “START” being indicated by a triple quick
	beep at 0. The timer will automatically start to count the
	elapsed time and this will continue until the			button is
	pressed and held for one second.
	At any	stage a quick press of	the	button will

resynchronise the timer to the nearest full minute and then carry on the count down.

Example:

Press at 3mins 24secs the timer will reset to 3mins 0secs

Press at 7mins 52secs the timer will reset to 8mins 0secs