mn100 Dual Digital Display
4 - Seatrial and Calibration
Once the Micronet Instrument system has been installed on the vessel and Auto Networking has been completed it is necessary to carry out Calibration.
It is not safe to use the instruments for navigational purposes until Calibration has been carried out correctly.
4.1Depth Offset
The default depth offset is 0.0 making the instrument read the Depth below the Transducer. By adding a +ve or
Press and hold the 
button for 2 seconds to enter Setup
Press the 
button repeatedly to scroll to the “SETUP/DEPTH” Chapter
Press 
button to advance to the “KEEL / WLINE” Page
Press the 
button to enter Edit Mode
Press the 
and 
buttons to change the value
Press the 
button to exit Edit Mode
Press and hold the 
button to exit Setup and return to normal operation.
26