mn100 Dual Digital Display
4.3Wind Calibration
Both Wind Speed and Direction can be calibrated to ensure that readings from the Wind Transmitter are displayed accurately.
4.3.1 Wind Angle Offset
Motor the vessel directly into the wind.
Press and hold the 
button for 2 seconds to enter Setup
Press the 
button repeatedly to scroll to the “SETUP/WIND” Chapter
Press the 
button to advance to “WIND/+0000” Page
Press the 
button to enter Edit Mode
Press the 
and 
buttons to change the displayed value to 000.
The bottom digits will indicate the number of degrees of offset entered.
Press the 
button to exit Edit Mode
Press and hold the 
button to exit Setup and return to normal operation.
4.3.2 Wind Speed Correction
Note: Wind Speed reading is factory calibrated to display correctly and should not be altered unless external factors are thought to be causing incorrect readings. Correction should only be carried out if a known correct Wind Speed is available.
Press and hold the 
button for 2 seconds to enter Setup
Press the 
button repeatedly to scroll to the “SETUP/WIND” Chapter
Press the 
button to advance to “WIND/+0%” Page
Press the 
button to enter Edit Mode
Press the 
and 
buttons to change the displayed value to the required percentage.
The bottom digits will indicate the displayed Wind Speed.
Press the 
button to exit Edit Mode
Press and hold the 
button to exit Setup and return to normal operation.
28