Cisco Systems 4490 appendix 3-12, Repeat this step to secure the left side bracket to the rack

Page 12
Repeat this step to secure the left side bracket to the rack.

Chapter 3 Installing the Cisco Global Site Selector 4490

Installing Your Unit

3.Align the right side bracket on the GSS 4490 to the two-post rack, then insert and tighten the retaining screws (labeled 1 in Figure 3-8) to secure the GSS 4490 to the rack.

Note Due to variations in rack size and rack holes, Cisco Systems does not provide the two-post rack mounting screws in the rack kit.

Repeat this step to secure the left side bracket to the rack.

Figure 3-8 Attaching the GSS 4490 to the Two-Post Rack

1

Cisco GSS 4490

!

1

 

97660

 

Cisco Global Site Selector 4490 Hardware Installation Guide

3-12

78-15755-01

Image 12
Contents Installing the Cisco Global Site Selector C H A P T E RCisco Global Site Selector Hardware Installation Guide Unpacking and Inspecting the Global Site SelectorTools and Parts Required If the Product is DamagedFigure 3-1 Four-Post Rack Installation Kit 83198Installing Your Unit Installing the Chassis in a Four-Post Rack Figure 3-2 Installing Clip Nuts or Cage Nuts in a Non-Threaded RackSlide rail assembly Figure 3-4 Attaching the Inner Slide Rail to the GSS 2 Adjustment screw 3-10 Release tab3-11 Installing the Chassis in a Two-Post RackCisco Global Site Selector 4490 Hardware Installation Guide Chapter 3 Installing the Cisco Global Site Selector3-12 Repeat this step to secure the left side bracket to the rackInstalling the Chassis on a Workbench or Tabletop 3-13Connecting Cables 3-14Connecting Power Booting the System3-15 Checking the Front Panel LEDs 3-16Color StateRemoving or Replacing a Cisco Global Site Selector 3-17Table 3-1 Front Panel LEDs continued 3-18 To physically remove a GSS 4490 from your network, follow these steps3-19 To physically replace a GSS 4490, follow these steps3-20
Related manuals
Manual 94 pages 36.36 Kb Manual 92 pages 54.88 Kb