Cisco Systems 4490 appendix Installing the Chassis in a Four-Post Rack

Chapter 3 Installing the Cisco Global Site Selector 4490

Installing Your Unit

Installing the Chassis in a Four-Post Rack

To install the Global Site Selector 4490 in a four-post rack, follow these steps:

1.Select a 1-RU-size location in the rack to mount the GSS 4490. If the rack holes are not threaded, install a clip nut or cage nut in the top and bottom positions of the selected 1-RU location (Figure 3-2), starting with the right front side of the rack (as viewed from the front of the GSS 4490). Install a clip nut or cage nut in the corresponding positions on the rear of the rack.

Repeat this step for the left front side of the rack and the corresponding location on the rear of the rack.

Figure 3-2 Installing Clip Nuts or Cage Nuts in a Non-Threaded Rack

1 2

83200

1

Cage nuts

2

Clip nuts

	Cisco Global Site Selector 4490 Hardware Installation Guide
3-6	78-15755-01