Chapter 3 Installing the Cisco Global Site Selector 4490
Connecting Cables
Connecting Cables
To connect network and console cables to your GSS 4490, follow these steps.
1.For network connections, insert a Category 5 UTP cable into the Ethernet 0 or Ethernet 1 receptacle on the GSS 4490 back panel (Figure
2.Connect the other end of the network cable to a hub or switch in your network.
3.For console connections, plug the cable into the console port on the GSS 4490 back panel.
4.Connect the other end of the console cable to a console or a communications server.
Figure
1
97214
2 3 4
1 | AC power receptacle | 2 | Ethernet 0 receptacle |
|
|
|
|
3 | Ethernet 1 receptacle | 4 | Console port |
|
|
|
|
| Cisco Global Site Selector 4490 Hardware Installation Guide |
|