Cisco Systems 4490 1 Four-Post Rack Installation Kit, Installing the Cisco Global Site Selector

Contents Installing the Cisco Global Site Selector C H A P T E RCisco Global Site Selector Hardware Installation Guide Unpacking and Inspecting the Global Site SelectorTools and Parts Required If the Product is DamagedFigure 3-1 Four-Post Rack Installation Kit 83198Installing Your Unit Installing the Chassis in a Four-Post Rack Figure 3-2 Installing Clip Nuts or Cage Nuts in a Non-Threaded RackSlide rail assembly Figure 3-4 Attaching the Inner Slide Rail to the GSS 2 Adjustment screw 3-10 Release tab3-11 Installing the Chassis in a Two-Post RackCisco Global Site Selector 4490 Hardware Installation Guide Chapter 3 Installing the Cisco Global Site Selector3-12 Repeat this step to secure the left side bracket to the rackInstalling the Chassis on a Workbench or Tabletop 3-13Connecting Cables 3-14Booting the System Connecting Power3-15 Checking the Front Panel LEDs 3-16Color State3-17 Removing or Replacing a Cisco Global Site SelectorTable 3-1 Front Panel LEDs continued 3-18 To physically remove a GSS 4490 from your network, follow these steps3-19 To physically replace a GSS 4490, follow these steps3-20