Cisco Systems 3-18, To physically remove a GSS 4490 from your network, follow these steps

Contents Installing the Cisco Global Site Selector C H A P T E RCisco Global Site Selector Hardware Installation Guide Unpacking and Inspecting the Global Site SelectorTools and Parts Required If the Product is DamagedFigure 3-1 Four-Post Rack Installation Kit 83198Installing Your Unit Installing the Chassis in a Four-Post Rack Figure 3-2 Installing Clip Nuts or Cage Nuts in a Non-Threaded RackSlide rail assembly Figure 3-4 Attaching the Inner Slide Rail to the GSS 2 Adjustment screw 3-10 Release tabCisco Global Site Selector 4490 Hardware Installation Guide 3-11Installing the Chassis in a Two-Post Rack Chapter 3 Installing the Cisco Global Site Selector3-12 Repeat this step to secure the left side bracket to the rackInstalling the Chassis on a Workbench or Tabletop 3-13Connecting Cables 3-14Connecting Power Booting the System3-15 Color Checking the Front Panel LEDs3-16 StateRemoving or Replacing a Cisco Global Site Selector 3-17Table 3-1 Front Panel LEDs continued 3-18 To physically remove a GSS 4490 from your network, follow these steps3-19 To physically replace a GSS 4490, follow these steps3-20