Lucent Technologies 518-456-151 manual Form C3 PARTNER-18 Phone, Check Desired Features

Form C3: PARTNER-18 Phone	PAGE
	3 of 8

Make as many copies as you need. Use template and/or checklist. For additional instructions, see pages 8 through 13.

Check Desired Features

Also write in extension or group number

Template Instructions

SAMPLE

Automatic System Answer Button {#111} 6	ASA
Direct Extension Dial Button {#113} 6	DXD
Night Service Button {#503}	NightSvc

Ext. 10

• If desired, write in line number, pool access code†, dial code feature, or auto dial number 04

•If desired, write in Line Ringing (Imm, Del, or No) from Form B2 DEL

•If desired, write in Line Access Restriction or Pool Access Restriction† IN (Out, In, or No) from Form B2

†Available with ACS R2.0 or later only.

	⎫
	⎬PARTNER-18D only
	⎭
Intercom	Intercom
	Ext.

*In Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool. (ACS R2.0 or later only)

Specify Automatic Line Selection: ________________________________________________________________

Identify extensions programmed as shown: ___________________________________________________

Outgoing Call Restriction Button {#114} 1	OCR
Wake Up Service Button {#115}	Wake
Caller ID Call Log (F 23) 6	Calls
Caller ID Inspect (F 17)	ID-Inspect
Caller ID Name Display (F 16)	ID-Name
Do Not Disturb (F 01)	DND
Privacy (F 07)	Priv
VMS Cover (F 15)	VMSCover
Voice Interrupt on Busy Talk-Back (F 18)	VIOB
Account Code Entry (F 12) 2	ACE
Background Music (F 19) 2	Music
Call Coverage (F 20 XX XX)2,4 ,6	Cover-XX XX
Call Forwarding/Call Follow-Me (F 11 XX XX) 2,4 CF-XX XX
Call Park (I XX) 3	Park
Call Pickup (I 6 XX)	Pickup-XX
Conference Drop (F 06)	Drop
Contact Closure 1 (F 41) 2	CC1
Contact Closure 2 (F 42) 2	CC2
Direct Line Pickup-Active Line (I 68)	DLPA
Direct Line Pickup-Idle Line (I 8)	DLPI
Exclusive Hold (F 02)	ExHold
Fax Management (I XX) 2	FAX-XX
Group Calling-Ring/Page (I 7 G or I *7 G)	GCall-g
Group Hunt-Ring/Signal (I 77 G or I *77 G)	Hunt-g
Group Pickup (I 66 G)	P/U Grp-g
Intercom Autodial (I XX or I *XX) 2	Ext-XX
Last Number Redial (F 05)	LNR
Loudspeaker Paging (I 70)	Loudspk
Manual Signaling (F 13 XX or F 13 *XX) 2	MS-XX
Message Light Off (F 10 XX) 5	MsgOff-XX
Message Light On (F 09 XX) 5	MsgOn-XX
Recall (F 03)	Recall
Save Number Redial (F 04)	SNR
Simultaneous Paging (I * 70)	SPage
Station Lock (F 21) 2	Lock
Touch-Tone Enable (F 08)	TT-EN
Voice Mail Messages Button (I 777)	VMMsgs-777
Voice Mailbox Transfer (F 14)	VMBox

Only	LED
	Required

1.Requires Auto Dial button for each extension.

2.Button with lights is recommended, but not required.

3.Extension number can be programmed as Auto Dial button.

4.You can program the origination extension only or both the origination and destination extension.

5.You can program the extension number.

6.Available with ACS R2.0 or later only.

F= Feature button G = Group

I= Left Intercom button

XX = Extension