Lucent Technologies 518-456-151 manual Form B2 Customized Extension Settings

Form B2: Customized Extension Settings	PAGE
	1 of 2

Required if you want to change extension settings from defaults. For additional instructions, see pages 6 and 7.

Identify Extension Settings

if Different than Default

No.JackExt.	{#303}LanguageDisplay	ExtensionAutomatic {#304}Privacy	{#305}RingingAbbreviated	AccountForced {#307}EntryCode	{#308}RingDistinctive	VMSAutomatic {#310}Cover	InterruptVoice {#312}BusyOn	{#313}ModeAccessLine
	1							2
	E✔	NA✔	A✔	NA✔	A✔	NA✔	NA✔	P✔
10								K
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

Hybrid Mode Only:

List{#301} forExtensions individual* linesPooled

NA✔

ALL

Identify Line Ringing {CTP} Option

If Different than Default

Write line numbers or pool access codes* in each column to show desired Line Ringing options

Immediate	Delayed	No Ring *	Lines/Pools3 *
✔ lines		✔ pools	Not Assigned

		Identify Restrictions/Permissions
		If Different than Defaults
Write line numbers or pool access codes				4
for Line Access Restriction {#302} or				OutgoingCall Restriction{#401}
Pool Access Restriction {#315}*
	No Restriction ✔
Outgoing		Incoming	No Access	NR✔
only		only

Identify

Group Assignments

ListDisallowed	{#405}Assignment	ListAllowed {#408}Assignment	GroupPickup	{#501}Extensions	GroupCalling {#502}Extensions	GroupHunt {#505}Extensions	OnlyVMS	ServiceNight {#504}ExtensionsGroup
5			7		8
		6
						9
							10
1 – 4		1 – 4 1 – 4			1 – 4	1 – 6 7		NA✔
	NA✔			NA✔		NA✔

1.Write S for Spanish or F for French.

2.In Hybrid Mode only, write K for Key extension. Extension 10 always operates as a Key extension.

3.In Key Mode, use Line Assignment {#301} to remove lines from or assign lines to extensions. In Hybrid Mode, use Pool Extension Assignment {#314} to remove pools from or assign pools to extensions.

4.Write IN for Inside Only or LOC for Local Only to indicate restrictions for all outgoing calls on all lines.

5.Write list number (1–8). Also see Form D, Disallowed Phone Number Lists {#404}.

6.Write list number (1–8). Also see Form D, Allowed Phone Number Lists {#407}.

7.Write group number (1–4).

8.Write group number (1–4). If a loudspeaker is connected and Simultaneous Paging is desired, put appropriate extensions in Calling Group 1. Also see Form C, Simultaneous Paging.

9.Write group number (1–6).

10. Check off the same PARTNER MAIL or PARTNER MAIL VS extensions indicated on Form B1. For the PARTNER Voice Messaging PC Card, virtual extensions 86 and 87 are automatically assigned to Hunt Group 7.

*Pooling available only for ACS R2.0 or later.

Assignments

✔= Default

A= Assigned or Active E = English

NA	=	Not Assigned or Not Active
NR	=	No Restriction
P	=	Pooled
{CTP} =		Centralized Telephone Programming