Motorola LD-W-1 manual Technical specifications, Checking the package contents

Page 9

English

LD-G-1 / LD-W-1

mode the velocity of all speed levels is reduced to ca. 50 % compared to the standard velocity. The accessories connected to the output switched by the auxiliary function F4 are switched together with the shunting gear. As soon as the shunting gear is switched on, any acceleration or brake delay settings are deactivated.

By attaching a solder bridge the shunting gear can be deactivated permantly.

Restrictions in Motorola I format

The auxiliary functions F1 to F4 are not available in Motorola I format. It is possible to control one accessory via the function "function" according to the direction of travel.

Technical specifications

Data format

Motorola I and II

Supply voltage

12-22 Volt digital voltage

Current consumption

 

(without connected loads)

ca. 10 mA

Max. current for motor

1.000 mA

Max. current per function output

500 mA

Max. total current

1.500 mA

Protected to

IP 00

Ambient temperature in use

0 - + 60° C

Ambient temperature in storage

-10 - + 80° C

Comparative humidity allowed

max. 85 %

Dimensions

ca. 25 x 17 x 8 mm

Weight

ca. 5 g

Checking the package contents

Check the contents of the package for completeness:

§1 module

§1 manual

Page 26

Image 9
Contents LD-G-1n Anleitung 07/2002 Tams Elektronik GmbH NederlandsTable of contents Intended use How to use this manualSafety instructions Mechanical hazardsElectrical hazards Fire risk Thermal dangerOther dangers Information Motorola I and Motorola II format EMC declarationOperation overview Checking the package contents Technical specificationsSafe and correct soldering Required tools and consumablesConnecting the LD-W-1 Connecting the LD-G-1Connecting the lighting and other accessories Performing a visual checkConnecting the LEDs Setting the locomotive decoder Using an NEM 652 interface connectorSetting the driving characteristics Setting the locomotive address Switching the shunting gear Emergency stop during active acceleration and brake delayImprovement of the driving characteristics OperationManufacturers note FAQCertification Conditional warrantyAdresse Lötfeld Soldering field Adresse Lötfeld Soldering field LD-G-1 / LD-W-1 Adresse Lötfeld Soldering field Adresse Lötfeld Soldering field LD-G-1LD-G-1 LD-W-1 LD-G-1 / LD-W-1 LD-G-1 / LD-W-1 Tams Elektronik GmbH